Herbert & G-Major users Parallel Loop Tone question

[MARK2C]

Does your G-Major (V1.27) seem to add a high spiky treble to the tone on Ch. 2 and 3 ?
It's in the Parallel loop, EQ off, Noise gate off, Delay and Reverb only.
The difference is very audible when the unit is bypassed and the treble response
is much sweeter and the ear piercing spike is gone.

If any of you guys have heard this, how did you get rid of it.

Thanks !!!

 

[moltenmetalburn]

are you using the kill dry function? if not you may be mixing dry with dry AND wet and causing phasing issues.

parallel loops provide the dry signal for you, it is the unaffected amp tone, so the processor should only be making the wet sounds "in parallel" to that dry signal.

 

[MARK2C]

Kill Dry is on. No Phasing issues.

 

[moltenmetalburn]

hmmm, im stumped sounds like maybe just the A/D conversion is messing with your tone?

 

[MARK2C]

Allright.

After a few hours of tweaking I found both the Reverb and Delay have Hi-Cut functions for tuning these frequencies.
I cut them back a little on each effect and it's better, but not the best yet.