Hermansson Laney PA 100

[Tone Monster]

When will you have a production model?

I’ve been working on it for four years now. It seems to take a lot of time since I don’t want to cut any corners. I’ve been searching and bought over ten cubic meters of new old stock components from the 60s and 70s! The custom made transformers are finished, the MIDI system is finished. At the moment I’m rewriting the layout since I will use this new compression circuit instead of my old gain boost circuitry. I will start with the flagship model with four channels.

I will let you guys know when I have the prototype up and running and post some clips!

Again, thank you for all the cheering!

 

[controlled_voltage]

sheer genius
damm!

 

[LP Freak]

When will you have a production model?

I’ve been working on it for four years now. It seems to take a lot of time since I don’t want to cut any corners. I’ve been searching and bought over ten cubic meters of new old stock components from the 60s and 70s! The custom made transformers are finished, the MIDI system is finished. At the moment I’m rewriting the layout since I will use this new compression circuit instead of my old gain boost circuitry. I will start with the flagship model with four channels.

I will let you guys know when I have the prototype up and running and post some clips!

Again, thank you for all the cheering!

Any idea what the price will be?

 

[Beyond Black]

When will you have a production model?

I’ve been working on it for four years now. It seems to take a lot of time since I don’t want to cut any corners. I’ve been searching and bought over ten cubic meters of new old stock components from the 60s and 70s! The custom made transformers are finished, the MIDI system is finished. At the moment I’m rewriting the layout since I will use this new compression circuit instead of my old gain boost circuitry. I will start with the flagship model with four channels.

I will let you guys know when I have the prototype up and running and post some clips!

Again, thank you for all the cheering!

Any idea what the price will be?

 

[Hermansson Amplification]

When will you have a production model?

I’ve been working on it for four years now. It seems to take a lot of time since I don’t want to cut any corners. I’ve been searching and bought over ten cubic meters of new old stock components from the 60s and 70s! The custom made transformers are finished, the MIDI system is finished. At the moment I’m rewriting the layout since I will use this new compression circuit instead of my old gain boost circuitry. I will start with the flagship model with four channels.

I will let you guys know when I have the prototype up and running and post some clips!

Again, thank you for all the cheering!

Any idea what the price will be?

I need to get prices for the custom made chassis, footswitch chassis, and headshell before I can set the final pricing.
But probably in the $5000 range for the flagship model.

Here you can have a look at the huge Hermansson irons compared to the transformers to a SLO100:

 

[Exo-metal]

I can't look any longer or I'll have to spend every last cent...very sick man!!!

 

[LP Freak]

When will you have a production model?

I’ve been working on it for four years now. It seems to take a lot of time since I don’t want to cut any corners. I’ve been searching and bought over ten cubic meters of new old stock components from the 60s and 70s! The custom made transformers are finished, the MIDI system is finished. At the moment I’m rewriting the layout since I will use this new compression circuit instead of my old gain boost circuitry. I will start with the flagship model with four channels.

I will let you guys know when I have the prototype up and running and post some clips!

Again, thank you for all the cheering!

Any idea what the price will be?

I need to get prices for the custom made chassis, footswitch chassis, and headshell before I can set the final pricing.
But probably in the $5000 range for the flagship model.

Here you can have a look at the huge Hermansson irons compared to the transformers to a SLO100:

That’s nuts. The head alone will need casters

 

[skullfxr]

When will you have a production model?

I’ve been working on it for four years now. It seems to take a lot of time since I don’t want to cut any corners. I’ve been searching and bought over ten cubic meters of new old stock components from the 60s and 70s! The custom made transformers are finished, the MIDI system is finished. At the moment I’m rewriting the layout since I will use this new compression circuit instead of my old gain boost circuitry. I will start with the flagship model with four channels.

I will let you guys know when I have the prototype up and running and post some clips!

Again, thank you for all the cheering!

Any idea what the price will be?

I need to get prices for the custom made chassis, footswitch chassis, and headshell before I can set the final pricing.
But probably in the $5000 range for the flagship model.

Here you can have a look at the huge Hermansson irons compared to the transformers to a SLO100:

That’s nuts. The head alone will need casters

Holy shit. Lol. That is real iron. Dayum

 

[glip22]

Henric,
What will the plate voltage be for the 100 watt PT?

 

[Hermansson Amplification]

Henric,
What will the plate voltage be for the 100 watt PT?

About 550VDC.

 

[Kordoba]

All of this amazing audio recorded on a little $140 Tascam.

 

[Hermansson Amplification]

All of this amazing audio recorded on a little $140 Tascam.

Yeah, it’s a very handy little unit! I’m using a Golden Age R1 ribbon mic to it which works excellent for guitars!

 

[glip22]

Henric,
What will the plate voltage be for the 100 watt PT?

About 550VDC.

That's great! Will they be shipping directly from you? Ar you doing them in runs or per each order with a lead time?

 

[Hermansson Amplification]

Henric,
What will the plate voltage be for the 100 watt PT?

About 550VDC.

That's great! Will they be shipping directly from you? Ar you doing them in runs or per each order with a lead time?

They will be shipped from me to begin with, I might look for a distributor in the US later. I already have a growing waiting list, but I will probably make them I runs later. Need to get the prototype finished first!
BTW, the two channels of this Laney is based on channel 2 and 4 from the production amp.