
dfrattaroli
New member
I rewired my Uberkab for 4 ohms. I didn't want to run it at 16 ohms with the Mark V:25 even though it's a safe mismatch. I may go back if I feel like trying it. Nonetheless I wanted to get opinions. In truth, they look shinier in person than in the pics.
Lastly, I was surprised at the quality of the stock solder joints. I bought this cab new and in my opinion, the joints were all dull. I expected better. It had Sound Runner 10g line in it. I used Sound Runner 12g because I think it's easier to heat and get good joints. I have 14g Sound Runner as well but I opted for the thicker line. Honestly, I think anything over 14g is overkill.
Lastly, I was surprised at the quality of the stock solder joints. I bought this cab new and in my opinion, the joints were all dull. I expected better. It had Sound Runner 10g line in it. I used Sound Runner 12g because I think it's easier to heat and get good joints. I have 14g Sound Runner as well but I opted for the thicker line. Honestly, I think anything over 14g is overkill.