How to use The EBtech with Mod 50

  • Thread starter Thread starter RP Rad
  • Start date Start date
RP Rad

RP Rad

New member
I just got a line shifter and want to know how you guys are hooking it up in your effects loop? :confused:
I am getting distortion in my loop and hopping this would cure it.
 
Here's thread I posted a while ago - my experience with the Ebtech is towards the end... it "works" but I'm not in love with it. I use a Line 6 unit as well...

As far as the hook up, just put it in series between your effect and the loop. Plug your effect into the -10 side, and the Egnater loop into the +4.

viewtopic.php?f=26&t=38850
 
Thanks for the info. I have found out I hate the Line6 DL4 because it changes my tone and not for the good. So I might try the DD20 and see how that works.

Thanks Again! :thumbsup:
 
if you can live without reverb, try the delay in the parallel loop. You probably won't notice too much tone suck.
 
Back
Top