I have Rottingcorpses 5153, show me your settings.

  • Thread starter Thread starter Juggernaut
  • Start date Start date
Juggernaut

Juggernaut

Well-known member
So I have Martins 5153, share your settings, I'd like to check out some different tone settings other than my own, (not that I have any yet).

Any tips will be appreciated, this is my first go with one of these amps.
 
I’ll post a lick of mine , and my gate . I push it hard and gate it tight . It’s what I call my Fear Factory amp. My 5153 always ends sounding like demanufacture after I set it
 
You don't need any help dialing in an amp. You always know how to dial stuff in.
You need to clean that room up to make more room for the gear.
Or I could stop buying gear for you to play with.
Quit molesting my gear!
 
I’ll post a lick of mine , and my gate . I push it hard and gate it tight . It’s what I call my Fear Factory amp. My 5153 always ends sounding like demanufacture after I set it
That's partially why I bought this. You told me how much you loved that amp.
 
I'll post my shitty settings in a day or two on the blue channel with a boost and noise gate. I'm out on the red channel as I'm still messing with it. Red channel on 4, the gain starts getting out of control if that helps.
 
Everytime i use other people's setting's, they don't work. Use your ears and twist the knobs, you'll get there.

Takes a while sometimes but well worth the effort.
 
Oh and keep the gain as low as you can, boost or no boost, it will be better, tighter and meaner.
 
I'll post my shitty settings in a day or two on the blue channel with a boost and noise gate. I'm out on the red channel as I'm still messing with it. Red channel on 4, the gain starts getting out of control if that helps.
Red channel can be pushed harder with a super tight gate . I gate it to the point people hate . Then you an usythe gain at 6 to 8.
 
Everytime i use other people's setting's, they don't work. Use your ears and twist the knobs, you'll get there.

Takes a while sometimes but well worth the effort.
Oh no, I can dial in an amp, not a problem there. I just haven't had any experience with this particular one, and thought, 1. Any tricks I'm unaware of might help, 2. Sometimes other peoples settings will point me in a direction that I otherwise wouldn't have thought of.
 
Oh no, I can dial in an amp, not a problem there. I just haven't had any experience with this particular one, and thought, 1. Any tricks I'm unaware of might help, 2. Sometimes other peoples settings will point me in a direction that I otherwise wouldn't have thought of.
Martin is sending you my number
 
Back
Top