Incoming Martin Golub Marshall Mod

[jonny toetags]

No offense to any guy who is doing something truly unique ( i have yet to see something like that ) but as far as mods go, were all doing very similar things. Adding tube gain stages, fine tuning existing satges, jose mv's with the diodes, converting a cathode following tone stack to a plate driven tone stack, even the so called hottest ticket in town , the new AFD is just duplicating v1b on a 2203, using a lower value like 220k on both voltage dividers etc. Cascade mods, RR mods, one wire mods all these different names for basically the same thing..........shop around, do a little reading, youll be glad you did. I whip out three high gain mods in the past 2 weeks. 3 months for anything he should be building you a new amp.

I like this post

dig the bad ass wood on some your amp heads.

I'm not Glen Morris...just a proud supporter/fanatic
(if I'm understanding your comment properly )

 

[CaseyCor]

No offense to any guy who is doing something truly unique ( i have yet to see something like that ) but as far as mods go, were all doing very similar things. Adding tube gain stages, fine tuning existing satges, jose mv's with the diodes, converting a cathode following tone stack to a plate driven tone stack, even the so called hottest ticket in town , the new AFD is just duplicating v1b on a 2203, using a lower value like 220k on both voltage dividers etc. Cascade mods, RR mods, one wire mods all these different names for basically the same thing..........shop around, do a little reading, youll be glad you did. I whip out three high gain mods in the past 2 weeks. 3 months for anything he should be building you a new amp.

I like this post

I as well.

Now Jerry, feel free to send me one of those Triple Stage combo's, with a master and a loop.

 

[tonmazz]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

 

[jerrydyer]

well sounds good sir. even though I would never put a .022 over the 2.7k.
prolly does phenominal work.

 

[Anonymous]

..........shop around, do a little reading, youll be glad you did.

absolutely, some of these two dollar two minute mods for these ridiculous prices is just crazy, mostly due to internet hype and name dropping.

It is lack of knowledge more than hype. If people knew how easy it is to solder in some of these mods, they'd be less likely to pay a fortune for them...

Steve

 

[jerrydyer]

No offense to any guy who is doing something truly unique ( i have yet to see something like that ) but as far as mods go, were all doing very similar things. Adding tube gain stages, fine tuning existing satges, jose mv's with the diodes, converting a cathode following tone stack to a plate driven tone stack, even the so called hottest ticket in town , the new AFD is just duplicating v1b on a 2203, using a lower value like 220k on both voltage dividers etc. Cascade mods, RR mods, one wire mods all these different names for basically the same thing..........shop around, do a little reading, youll be glad you did. I whip out three high gain mods in the past 2 weeks. 3 months for anything he should be building you a new amp.

I like this post

I as well.

Now Jerry, feel free to send me one of those Triple Stage combo's, with a master and a loop.

well,,, my prices are really good,....order up man!

 

[Anonymous]

I would never put a .022 over the 2.7k.

Me either...

Steve

 

[Anonymous]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

a good friend of mine recently had a MV and an effects loop installed on a NMV Marshall for $700.00, does that sound like a good deal?

I'd happily accept that much for that work...

Steve

 

[tweed]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

a good friend of mine recently had a MV and an effects loop installed on a NMV Marshall for $700.00, does that sound like a good deal?

WTF?

 

[tonmazz]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

a good friend of mine recently had a MV and an effects loop installed on a NMV Marshall for $700.00, does that sound like a good deal?

You should have told him that was too much, I blame you!

 

[jerrydyer]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

a good friend of mine recently had a MV and an effects loop installed on a NMV Marshall for $700.00, does that sound like a good deal?

it was a good deal for the tech. thats like maybe $300 , maybe $400 at the absolute highest . I do a tube loop for $250 and the metro one a little cheaper than that

 

[jonny toetags]

My Golub mod cost me 300$ at the time (Crunch Mod), which I thought was fair.
My Caswell cost me 450$, and had a lot more options than the Golub.

 

[tweed]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

a good friend of mine recently had a MV and an effects loop installed on a NMV Marshall for $700.00, does that sound like a good deal?

it was a good deal for the tech. thats like maybe $300 , maybe $400 at the absolute highest . I do a tube loop for $250 and the metro one a little cheaper than that

it was a metro loop I believe

Metro loop kit 90 bucks, PPIMV kit 13 bucks, paying 700 for the install = GANG RAPE by Pacino and friends.

 

[jerrydyer]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

a good friend of mine recently had a MV and an effects loop installed on a NMV Marshall for $700.00, does that sound like a good deal?

it was a good deal for the tech. thats like maybe $300 , maybe $400 at the absolute highest . I do a tube loop for $250 and the metro one a little cheaper than that

it was a metro loop I believe

got shanked big time with a dull filed down prison fork

 

[jonny toetags]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

a good friend of mine recently had a MV and an effects loop installed on a NMV Marshall for $700.00, does that sound like a good deal?

it was a good deal for the tech. thats like maybe $300 , maybe $400 at the absolute highest . I do a tube loop for $250 and the metro one a little cheaper than that

it was a metro loop I believe

Metro loop kit 90 bucks, PPIMV kit 13 bucks, paying 700 for the install = GANG RAPE by Pacino and friends.

lol...'Cruisin'd'

 

[Digital Jams]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

a good friend of mine recently had a MV and an effects loop installed on a NMV Marshall for $700.00, does that sound like a good deal?

Right in the lumber yard Danny.

 

[Digital Jams]

Ready set go!

 

[tweed]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

a good friend of mine recently had a MV and an effects loop installed on a NMV Marshall for $700.00, does that sound like a good deal?

it was a good deal for the tech. thats like maybe $300 , maybe $400 at the absolute highest . I do a tube loop for $250 and the metro one a little cheaper than that

it was a metro loop I believe

Metro loop kit 90 bucks, PPIMV kit 13 bucks, paying 700 for the install = GANG RAPE by Pacino and friends.

but this guy has a great ear for tone, that must be considered, no?

I don't care how good your ear is, that just plain ripping people off.

 

[tonmazz]

I had the Golub mod and it was nuclear! Perfect Doug Aldrich tone. I would say that he does a lot of work inside and nice work at that. It isn't just your .022 over a 2.7, he does some pretty neat things that makes his pretty unique sounding. Gets clever with how he uses power for the extra gain stage on mine and he also had a copper shield to prevent noise. Very nice work!

a good friend of mine recently had a MV and an effects loop installed on a NMV Marshall for $700.00, does that sound like a good deal?

it was a good deal for the tech. thats like maybe $300 , maybe $400 at the absolute highest . I do a tube loop for $250 and the metro one a little cheaper than that

it was a metro loop I believe

Metro loop kit 90 bucks, PPIMV kit 13 bucks, paying 700 for the install = GANG RAPE by Pacino and friends.

It's like getting your vehicle fixed. I just paid $1100 for an exaust leak, $150 in parts and the rest labor. Bang!

 

[boneyard]

isnt Martin Golub's crunch mod the SE+ mod that John Suhr did for custom audio when he was there???? im pretty damn sure that its John's mod that Martin uses right?

maybe a few tweeks for the specific amp that being modded