Kemper Profiler + Duncan Invaders - Metal (Free Profiles!)

  • Thread starter Thread starter fluff191
  • Start date Start date
I like the tones you're getting here, good job. Doesn't sound like a modeller to me. Did you have to mess around a lot with the raw tracks, or does the Kemper come close to these sounds by itself?
 
I put a HPF like I do for a real amp and added some compression. The Kemper gets ya 95% there though.
 
well, what do you think of the pickups? what do they compare to? more highs than the usual?
 
The Invaders and similar to a Duncan Blackout but with an incredibly large ass on them. Almost too dark in an all mahogany guitar but there's enough top end to be ok.
 
Thx a bunch, Bud! Sounds great! Adding it to my Kemper!

:)
 
Don't take this the wrong way but I didn't like that tone at all. It didn't have enough weird mids for me. :)
 
redrol":3ou3c2ma said:
Don't take this the wrong way but I didn't like that tone at all. It didn't have enough weird mids for me. :)
Click to expand...

Different strokes for different folks man no worries!

Although Kemper claims the guitar used doesn't matter when profiling it actually makes a huge difference. The profile I used was done on a different guitar which makes a huge difference.
 
Hmm that doesn't sound right. I mean you don't actually have to use a guitar at all to profile, just within the refining process. Maybe you should use different guitars when doing the refining that way any harmonics and other odd noises will be captured that one guitar may not produce.
 
Well true but the Kemper is measuring how the amp is responding, and the amp will respond differently too different guitars (The profile was made using actives but in the video I used passives for instance).

Good idea though. Maybe I will play around with using different guitars during the refining process. :thumbsup:
 
Sounds Killer Fluff... Just got a VHT 2/90/2 to power the kemper and run it through a Mesa recto cab and an old Randall cab in stereo and it sounds insane. I ran that DV profile just now and holy shit...Good job brother...
 
dwiz - how do I learn how to set that up? I've got a 2902 and a mesa cab as well - are the instructions more on the website or I don't remember a whole lot about that in the manual
 
Drkorey":32x52yt6 said:
dwiz - how do I learn how to set that up? I've got a 2902 and a mesa cab as well - are the instructions more on the website or I don't remember a whole lot about that in the manual
Click to expand...
The way I did it was just come out of the Master outputs of the Kemper and go to the input of the 2/90/2 then speaker out of the 2/90/2 to the cab.

If your running only one cab you can use the monitor out to the Mono input of the 2/90/2 then the speaker out to the cab. Make sure you turn off the Cab sim and it will sound so much better. I hope this helps... Let me know what you think and get ready to bring the house down.
 
dwizted":3b8dxtkw said:
Drkorey":3b8dxtkw said:
dwiz - how do I learn how to set that up? I've got a 2902 and a mesa cab as well - are the instructions more on the website or I don't remember a whole lot about that in the manual
Click to expand...
The way I did it was just come out of the Master outputs of the Kemper and go to the input of the 2/90/2 then speaker out of the 2/90/2 to the cab.

If your running only one cab you can use the monitor out to the Mono input of the 2/90/2 then the speaker out to the cab. Make sure you turn off the Cab sim and it will sound so much better. I hope this helps... Let me know what you think and get ready to bring the house down.
Click to expand...



This is my new rig as well... 2902 and kemper... It is absolutely insane.
 
VESmedic":2ar1ffey said:
dwizted":2ar1ffey said:
Drkorey":2ar1ffey said:
dwiz - how do I learn how to set that up? I've got a 2902 and a mesa cab as well - are the instructions more on the website or I don't remember a whole lot about that in the manual
Click to expand...
The way I did it was just come out of the Master outputs of the Kemper and go to the input of the 2/90/2 then speaker out of the 2/90/2 to the cab.

If your running only one cab you can use the monitor out to the Mono input of the 2/90/2 then the speaker out to the cab. Make sure you turn off the Cab sim and it will sound so much better. I hope this helps... Let me know what you think and get ready to bring the house down.
Click to expand...



This is my new rig as well... 2902 and kemper... It is absolutely insane.
Click to expand...

Yep cant wait for my brothas Corpse and Juggy to take her for a spin. Petey's Fortin profiles sound absolutely awesome with this set up. Also found some really killer Friedman,Matchless and an orangutan profiles that killer for the the blusey stuff...
 
fluff191":3vshq1zg said:
I put a HPF like I do for a real amp and added some compression. The Kemper gets ya 95% there though.
Click to expand...

HPF or LPF?

Interesting. I guess I should scrape together some coin to try one of these for home recording and finally get something done. Thanks for the clips!
 
[Yep cant wait for my brothas Corpse and Juggy to take her for a spin. Petey's Fortin profiles sound absolutely awesome with this set up. Also found some really killer Friedman,Matchless and an orangutan profiles that killer for the the blusey stuff...[/quote]


Oh yeah, the first thing I thought of was destroying the garage with Pete's Fortin profile thru that set up :rock:
 
Nice man, sounds great. I really want a Kemper someday... Damn weddings. :(
 
duodecim":2crsxqk8 said:
HPF or LPF?

Interesting. I guess I should scrape together some coin to try one of these for home recording and finally get something done. Thanks for the clips!
Click to expand...

Oops I meant LPF.

leib10":2crsxqk8 said:
Nice man, sounds great. I really want a Kemper someday... Damn weddings. :(
Click to expand...

Hey if she is truly a keeper she will understand when you tell her you have to put the wedding off to get a new piece of gear. :lol: :LOL:

Congrats man!
 
You must log in or register to reply here.
Back
Top