Les Paul Axcess Pickup Rings?

  • Thread starter Thread starter peckhart
  • Start date Start date
P

peckhart

Active member
Anyone know where I can get exact replacements of the pickup rings on the LP Axcess guitars? They are shorter than a normal LP ring. I think the bridge is more like the height of a typical neck and the neck is even shorter than that.
 
Mojotone sells low profile angled rings (3/8"-bridge & 1/8"-neck) for $1.60 each, but they're flat bottoms. So you'd have to sand the bottoms to match the LP's contour, which is easy to do if you place the sandpaper face-up over the pickup routes and just go slow.
 
RugbyBro":3rmg9105 said:
https://www.sweetwater.com/store/detail/PRPR025--gibson-accessories-pickup-mounting-ring-3-8-inch-bridge-creme?mrkgcl=28&mrkgadid=3157640887&rkg_id=0&product_id=PRPR025&campaigntype=shopping&campaign=aaShopping%20-%20Not%20In%20Stock&adgroup=Guitars&placement=google&adpos=1o2&creative=105593157841&device=c&matchtype=&network=g&gclid=EAIaIQobChMIpJ3OwZ6g4QIVeh6tBh1WtA7LEAQYAiABEgJxO_D_BwE

^ I think that's it. Looks like whats on mine.

cool, that looks right. I had a stripped ring screw in mine and had to drill it until the head was gone and I could lift off the ring and grab the rest of the screw and twist it out with pliers. The pickup ring is ok from the top, but the collar underneath for that screw ended up breaking. Probably not a big deal, but I will likely replace it.
 

Similar threads

Back
Top