Lock Picking/Bypassing

  • Thread starter Thread starter Kordoba
  • Start date Start date
K

Kordoba

Well-known member
Early this year I started messing with bump keys as well as measuring "do not duplicate" keys, then sending off the measurements to a place that will cut them for me.

Recently I started looking into lock bypassing just for shits, and I ran across this gadget. Any of you guys tried one of these?

 
Early this year I started messing with bump keys as well as measuring "do not duplicate" keys, then sending off the measurements to a place that will cut them for me.

Recently I started looking into lock bypassing just for shits, and I ran across this gadget. Any of you guys tried one of these?


I’ve used a tool like that and others similar to it quite a bit. You aren’t going to get in anywhere unnoticed, but they work pretty well after you get the hang of it.

This was my tool of choice most times

IMG_0065.jpeg


It goes right under the door and lets you turn the handle on the inside
 
I took my double sided key lock off to clean it out and lube it.
Took me an hour to put it back together.
I never looked at which way the 2 inner plates faced.
Finally got it right
 
I took my double sided key lock off to clean it out and lube it.
Took me an hour to put it back together.
I never looked at which way the 2 inner plates faced.
Finally got it right
Been there! :cheers:
 
I tried lock picking for awhile and just couldn’t get it. I’d probably need to try it again though….this time with patience lol
I am far from being good at it, but getting one of those clear practice kits is a big help because you can see what’s happening while you feel it happening
 
I am far from being good at it, but getting one of those clear practice kits is a big help because you can see what’s happening while you feel it happening
I need to try one of those then! I’ll look those kits up
 
Back
Top