Robotechnology
Active member
Since the family was away I decided to do a massive cabinet shootout. I picked a 4 channel amp, an Egnater Tourmaster 4100 and playing similar things through each channel and through 6 cabinets: Marshall Mode Four 280 4X12 bottom (VIN30's), Bogner Uberkab 4X12 (G12H30's & VIN30's), Egnater Tourmaster 4X12 bottom (VIN30's), Ear Candy Buzzbomb 2X12 (Governor & Texas Heat), Mesa 3/4 Back 2X12 (Black Shadow 90's) & Custom Audio Amplification 1X12 (Governor).
Here's the kicker though! AFTER I invested HOURS of my life moving cabs around and playing the same thing over and over I THOUGHT I selected the low sensitivity switch but, instead selected the high... so as you'll hear mic input clipping all over the videos AARRGGHH! Because this project took a lot of effort, rather than just scrapping it, I decided to put it up anyway. I will re-record everything again sometime this month and replace this video with one that doesn't have the input signal clipping. Stay tuned!
This is the video made with channel 1 of the Egnater:
I'll put channel 2-4 videos together and upload later today.
Here's the kicker though! AFTER I invested HOURS of my life moving cabs around and playing the same thing over and over I THOUGHT I selected the low sensitivity switch but, instead selected the high... so as you'll hear mic input clipping all over the videos AARRGGHH! Because this project took a lot of effort, rather than just scrapping it, I decided to put it up anyway. I will re-record everything again sometime this month and replace this video with one that doesn't have the input signal clipping. Stay tuned!
This is the video made with channel 1 of the Egnater:
I'll put channel 2-4 videos together and upload later today.
