Matrix GT1500FXBD with Axe 2 in a WDW Rig VIdeo Demo

[Mark Day]

It is impossible to capture what this sounds like in the room...HUGE. I used an iPhone 5 with the Tascam iM2 mic attachment.
I used a Friedman 4x12(GB's and V30's) for center dry and 2 Friedman 2x12"s (Lynchbacks) for wet only L&R.

The Matrix GT1500FXBD is a 3 channel amp..so in conjunction with the Axe 2 you have the capabilities to have a w/d/w rig in 3 rack spaces, pretty cool stuff.

Mark

 

[redrol]

Id like to hear that with the Kemper

 

[chumbucket]

Mark,
not being familiar with the AxeFX, does it have dry and wet outputs? I assumed it was just stereo output.

 

[Mark Day]

Mark,
not being familiar with the AxeFX, does it have dry and wet outputs? I assumed it was just stereo output.

Two discreet sets of outputs. I am able to send dry only mono to center channel through output 1, I can place FX in parallel(with no dry) and in stereo to go to output 2 (L&R) cabs. If I wanted to I could also send dry to L&R cabs. In this video L&R were wet only and in true stereo.

The Axe 2 has great routing features with mix and pan options.

This is true W/D/W.


Mark

 

[chumbucket]

Mark,
not being familiar with the AxeFX, does it have dry and wet outputs? I assumed it was just stereo output.

Two discreet sets of outputs. I am able to send dry only mono to center channel through output 1, I can place FX in parallel(with no dry) and in stereo to go to output 2 (L&R) cabs. If I wanted to I could also send dry to L&R cabs. In this video L&R were wet only and in true stereo.

The Axe 2 has great routing features with mix and pan options.

This is true W/D/W.


Mark

Is that a global setting or can you change it in a patch?

 

[Mark Day]

Mark,
not being familiar with the AxeFX, does it have dry and wet outputs? I assumed it was just stereo output.

Two discreet sets of outputs. I am able to send dry only mono to center channel through output 1, I can place FX in parallel(with no dry) and in stereo to go to output 2 (L&R) cabs. If I wanted to I could also send dry to L&R cabs. In this video L&R were wet only and in true stereo.

The Axe 2 has great routing features with mix and pan options.

This is true W/D/W.


Mark

Is that a global setting or can you change it in a patch?

Not Global, it is preset dependent.

Mark

 

[chumbucket]

Mark,
not being familiar with the AxeFX, does it have dry and wet outputs? I assumed it was just stereo output.

Two discreet sets of outputs. I am able to send dry only mono to center channel through output 1, I can place FX in parallel(with no dry) and in stereo to go to output 2 (L&R) cabs. If I wanted to I could also send dry to L&R cabs. In this video L&R were wet only and in true stereo.

The Axe 2 has great routing features with mix and pan options.

This is true W/D/W.


Mark

Is that a global setting or can you change it in a patch?

Not Global, it is preset dependent.

Mark

That is a super cool feature.
How about this? Can you output a non-cabbed tone to a power amp while also outputting a modeled cab/mic'ed tone to the board at the same time?

 

[Mark Day]

That is a super cool feature.
How about this? Can you output a non-cabbed tone to a power amp while also outputting a modeled cab/mic'ed tone to the board at the same time?

Yes this is how I was running my rig live.

Mark

 

[chumbucket]

That is a super cool feature.
How about this? Can you output a non-cabbed tone to a power amp while also outputting a modeled cab/mic'ed tone to the board at the same time?

Yes this is how I was running my rig live.

Mark

My word. That is badass.

 

[Greg Riley]

Intuition You need to do "Caught Between the Tigers" on that Rig

 

[university81]

that must a been killer in the room , chunky gain tones , sounds great

 

[gbsmusic]

As always Mark, great stuff!! Love all of your video's!!

 

[Shark Diver]

That is a great, small, versatile rig right there. Damn.

 

[tweed]

That is a great, small, versatile rig right there. Damn.

+1

 

[Mark Day]

We have these amps in stock


Mark