Mesa rectifier foot switch problem…

[JackBootedThug]

I mentioned this in the other thread but my factory foot switch is causing ground hum. Any suggestions on what to look for? Thanks! it’s that odd cable that you sometimes use on TV’s… can’t remember the type… when it’s plugged in, significant hum…. I was moving stuff around the other day and accidentally unplugged it and…..silence…

 

[311boogieman]

Seems it would have to be the cable or cable jack. Replace and Dioxit.

By TV, you mean the red and white RCA type jacks or what? I've had two different Rectifier footswitches. Dual is a normal tip & ring instrument cable and the Rectoverb is a 7 pin deal bump.

 

[JackBootedThug]

Mike B. Himself thinks it’s just my complete ton of shit I’m running causing a ground loop. Then our very Wayne said the same thing…. But dammit man…I can’t help it…

 

[JackBootedThug]

Took the pedal apart…everything is good….

 

[Rocker68]

While you have the pedal apart , do the continuity check with your multi meter ( does your meter beep ? ) . One end outside pin , other end inside where pin connects to the board . Thinking it's the ground .
Good luck grasshopper

 

[JackBootedThug]

While you have the pedal apart , do the continuity check with your multi meter ( does your meter beep ? ) . One end outside pin , other end inside where pin connects to the board . Thinking it's the ground .
Good luck grasshopper

I fixed it bro…. I unplugged it and hit the channel switch on the back…. Cleans are for pussies…. I told you you guys…Larry better watch out-CAUSE IM FAST AS FUCK AND IM GETTING THIS AMP SHIT DOWN YO!!!!

 

[311boogieman]

Mike B. Himself thinks it’s just my complete ton of shit I’m running causing a ground loop. Then our very Wayne said the same thing…. But dammit man…I can’t help it…

I've been saying that for some time now

Don't make me drive over there.