Fiesta Red
Well-known member
I had this built by Musikraft in 2024. It is in excellent condition. Has locking tuners installed as well as a string tree. Fender Sticker was applied after the build. Headstock is gloss, and there back of the neck is oiled. Nice dark neck. Wasn't used much so there is no real fret wear to speak of. Specs are as follows:
Neck:
2 Piece Constructed
Orientation:
Right for Right Handed Players
Scale Length:
25.5" Standard Fender
Number of Frets:
21
Nut Width:
1-11/16" (42.8mm)
Nut Slot Style:
1/8" Nut Slot (Standard Fender)
Heel Width and Type:
2-3/16" (55.55mm) Rounded Strat
Truss Rod Type:
Dual Acting w/4mm Hex Adjust @ Heel
59 Truss Option:
Standard Positioning
Shaft Wood:
Rock Maple
Fingerboard Wood:
Indian Rosewood Dark ($30.00)
Fingerboard Style:
Slab (Standard Fender)
Fingerboard Radius:
12"
Fingerboard Edge Style:
Semi Rolled Fingerboard Edges
Tuner Hole Size:
10mm (Modern Style Keys)
Top Dot Inlay:
1/4 Dots (Imitation Clay)
Custom Inlay Shape:
None (See Dot Inlay above)
Custom Inlay Material:
None See Dot Inlay Above
Side Markers:
Imitation Clay 2mm
Side Dot Location:
Center of Fingerboard Wood
12th Dot Spacing:
Wide (Vintage Style Pre 1964)
Fret Size and Type:
6100 Nickel Silver (Jumbo)
Skunk Stripe Option 2pc:
None
Back Profile Shape and Size:
Pro Mod C 79 89
Binding:
None
Tuner Install:
NONE
Headstock Veneer:
NONE
Nut Installation:
Install Slotted TUSQ Nut ($35.00)
Nut String Spacing:
Not Applicable
Finish:
Oil (Tinted) ($70.00)
Fingerboard Finish:
Oil on Rosewood Boards ($25.00)
Neck Mounting Holes:
Drill Standar Fender 4 Neck Mounting Holes
Carbon Fiber Reinforcing Rods:
None
** SOLD **
Neck:
2 Piece Constructed
Orientation:
Right for Right Handed Players
Scale Length:
25.5" Standard Fender
Number of Frets:
21
Nut Width:
1-11/16" (42.8mm)
Nut Slot Style:
1/8" Nut Slot (Standard Fender)
Heel Width and Type:
2-3/16" (55.55mm) Rounded Strat
Truss Rod Type:
Dual Acting w/4mm Hex Adjust @ Heel
59 Truss Option:
Standard Positioning
Shaft Wood:
Rock Maple
Fingerboard Wood:
Indian Rosewood Dark ($30.00)
Fingerboard Style:
Slab (Standard Fender)
Fingerboard Radius:
12"
Fingerboard Edge Style:
Semi Rolled Fingerboard Edges
Tuner Hole Size:
10mm (Modern Style Keys)
Top Dot Inlay:
1/4 Dots (Imitation Clay)
Custom Inlay Shape:
None (See Dot Inlay above)
Custom Inlay Material:
None See Dot Inlay Above
Side Markers:
Imitation Clay 2mm
Side Dot Location:
Center of Fingerboard Wood
12th Dot Spacing:
Wide (Vintage Style Pre 1964)
Fret Size and Type:
6100 Nickel Silver (Jumbo)
Skunk Stripe Option 2pc:
None
Back Profile Shape and Size:
Pro Mod C 79 89
Binding:
None
Tuner Install:
NONE
Headstock Veneer:
NONE
Nut Installation:
Install Slotted TUSQ Nut ($35.00)
Nut String Spacing:
Not Applicable
Finish:
Oil (Tinted) ($70.00)
Fingerboard Finish:
Oil on Rosewood Boards ($25.00)
Neck Mounting Holes:
Drill Standar Fender 4 Neck Mounting Holes
Carbon Fiber Reinforcing Rods:
None
** SOLD **
Last edited:
