
Chris6870
Well-known member
I really wanted a two hum white Charvel or a Pacer but have no interest in the new $299 Indonesian offering from Kramer (Gibson)
I already had a NOS Kramer Pacer body from the USA reissue run they did a few years back, so I sourced the best stuff I could find and built my own.
Alder body made in TN.
Schaller Trem (MIG)
Duncan JB in the bridge
Schaller neck p/u
Schaller tuners
CTS pots
Birdseye maple neck w/ asymetrical profile from Jamerson (Musikraft)
Here it is mocked up
and complete
It sounds and plays excellent. I'm really happy with it. I never cared for two tone controls so I wired the middle control as a volume control for the neck pickup so both pickups can be blended when the switch is in the middle position and the other is an overall tone control.
I already had a NOS Kramer Pacer body from the USA reissue run they did a few years back, so I sourced the best stuff I could find and built my own.
Alder body made in TN.
Schaller Trem (MIG)
Duncan JB in the bridge
Schaller neck p/u
Schaller tuners
CTS pots
Birdseye maple neck w/ asymetrical profile from Jamerson (Musikraft)
Here it is mocked up



and complete



It sounds and plays excellent. I'm really happy with it. I never cared for two tone controls so I wired the middle control as a volume control for the neck pickup so both pickups can be blended when the switch is in the middle position and the other is an overall tone control.