NCD: Weber 4x12 with Legacy Speakers

[scottosan]

What a great cab. This one came with (2) 65w 55hz cones and (2) 65w 75hz cones. Weber used to make scumbacks back in the day. These come with 40oz magnets, so would be closest to Scumback J55 and J75 speakers on paper. The cab itself is well constructed with all ply construction and 1960 specs. Definitely digging these compared to my V30/G12H30 cab.

 

[skullfxr]

Nice! I like a lot of Weber speakers. I have a few Alnicos, and a few standard models, nice stuff.

Cheers!

 

[skullfxr]

Is this replacing the mojo cab?

 

[scottosan]

Is this replacing the mojo cab?

No, I need more cabs

 

[skullfxr]

Is this replacing the mojo cab?

No, I need more cabs

OK good. Lol I love Mojo cabs. I just picked an unloaded seismic 2x12 for under $50 and a Line 6 spider valve cab, V30 loaded. It seems that people are offloading so fast on 4x12's

 

[scottosan]

So I pushed it a little today and it started to flub out at higher volumes. I took the back off again and with closer inspection, I noticed the bottom right speaker was very loose and was missing the bottom 2 nuts securing the frame. I picked some up and figure I'd pull and resecure everything. The speakers were in an x pattern. I then noticed the the 55hz speakers had the large dust caps that I felt kind of lacked high end. I moved the 55hz pair to the bottom. This cab/speaker combo sounds rediculoisly good. Its got the mids of the 35oz speaker but a metric shit ton of low end without getting loose. I now feel the V30s in my mojo have to go.

 

[RedB4Black]

I’m sure that speaker combo sound good. I used to have a couple of Mills Afterburner cabs with scumback (blue frame Webber made) H55/H75LDC that sounded really good. Stayed super tight in the oversized cab too.

 

[LPMojoGL]

Nice!