Need to attach Marshall logo - Suggestions?

[Badronald]

I have a Sourmash headshell for my JTM45.

I bought a Marshall logo and it has four pegs on the back.

I will NOT be drilling four holes into the face of that headshell.

I thought I read somewhere that a guy used a few dabs of silicone to attach a logo.

Any ideas?

Thanks!

 

[Anonymous]

I have a Sourmash headshell for my JTM45.

I bought a Marshall logo and it has four pegs on the back.

I will NOT be drilling four holes into the face of that headshell.

I thought I read somewhere that a guy used a few dabs of silicone to attach a logo.

Any ideas?

Thanks!

I don't see why you wouldn't drill the head shell, but if you don't want to, I had one with no pegs that I crazy glued onto a head shell and no way on hell is that thing coming off. Just a few dabs did it...

Steve

 

[Badronald]

I have a Sourmash headshell for my JTM45.

I bought a Marshall logo and it has four pegs on the back.

I will NOT be drilling four holes into the face of that headshell.

I thought I read somewhere that a guy used a few dabs of silicone to attach a logo.

Any ideas?

Thanks!

I don't see why you wouldn't drill the head shell, but if you don't want to, I had one with no pegs that I crazy glued onto a head shell and no way on hell is that thing coming off. Just a few dabs did it...

Steve

Crazy glue should work.

If I drilled I'd be terrified it'd be crooked. I guess I could then glue it.

Thanks.

 

[Bloodrock]

Snip off the pegs and use a little black 3M double sided tape. Removes in 10 seconds and cleans off easily if needed.

 

[sytharnia1560]

Snip off the pegs and use a little black 3M double sided tape. Removes in 10 seconds and cleans off easily if needed.

BAM ... nailed it

 

[Badronald]

Snip off the pegs and use a little black 3M double sided tape. Removes in 10 seconds and cleans off easily if needed.

So if I put strips at the ends, corners and center it won't pull off if the cover catches?
I guess it just need to be careful and if it does pull off I can easily re attach.

Thanks for the help men.

 

[ripleyripley]

Snip off the pegs and use a little black 3M double sided tape. Removes in 10 seconds and cleans off easily if needed.

So if I put strips at the ends, corners and center it won't pull off if the cover catches?
I guess it just need to be careful and if it does pull off I can easily re attach.

Thanks for the help men.

I just did the exact same thing with a broken Bogner logo and it isnt going anywhere.

 

[Badronald]

Just attached the logo with 3M black double sided tape.

Looks awesome!

Thanks for the suggestions!