noob question regarding pedal board and pedal switching

[Ventura]

Drilled them, fed the cables through and installed all connectors myself. Here are a couple more pics, don't know if they will help or not.



PS - do you have a MIDI lead coming out of that rig as well?? To do the Channel switching on the amp??

Peace,
V.

No, if you look at the loop module, you'll see I have three sockets (11, 12, 13) that are open/closed relays. They control my Uberschall's channel and loop functions just like an on/off foot switch would. Each is programmable, just like the effects loops.

Thank you!
V.

 

[Death by Uberschall]

Hot board for sure... Very nice. Thanks for all the info in this thread as some of you may know, I'm sorting through my board's creation as I type - power supply is key.

As for the question way up about the chip in the OD-1 and so forth, to the best of my knowledge, the OD-1 has the exact chip and can be purchased on line, off ePay for about $70 used...

Peace,
V.

I've been persuaded into going for a gig rig power supply over a PP2 which i was set on before..

Ya!! I just chatted with some cats from the UK and they're all over the GigRig gear - says it's bomber, built by incredible guitarists and made for the purists!! I'm stoked...
V.

The PP2+ powers my entire board except for the Reverbulator because it's 24v. Works beautifully, quietly.

 

[tekbow]

Hot board for sure... Very nice. Thanks for all the info in this thread as some of you may know, I'm sorting through my board's creation as I type - power supply is key.

As for the question way up about the chip in the OD-1 and so forth, to the best of my knowledge, the OD-1 has the exact chip and can be purchased on line, off ePay for about $70 used...

Peace,
V.

I've been persuaded into going for a gig rig power supply over a PP2 which i was set on before..

Ya!! I just chatted with some cats from the UK and they're all over the GigRig gear - says it's bomber, built by incredible guitarists and made for the purists!! I'm stoked...
V.

The PP2+ powers my entire board except for the Reverbulator because it's 24v. Works beautifully, quietly.

really? cool, how do you do that, i thought the PP2 only had like 8 outputs?

 

[Death by Uberschall]

Hot board for sure... Very nice. Thanks for all the info in this thread as some of you may know, I'm sorting through my board's creation as I type - power supply is key.

As for the question way up about the chip in the OD-1 and so forth, to the best of my knowledge, the OD-1 has the exact chip and can be purchased on line, off ePay for about $70 used...

Peace,
V.

I've been persuaded into going for a gig rig power supply over a PP2 which i was set on before..

Ya!! I just chatted with some cats from the UK and they're all over the GigRig gear - says it's bomber, built by incredible guitarists and made for the purists!! I'm stoked...
V.

The PP2+ powers my entire board except for the Reverbulator because it's 24v. Works beautifully, quietly.

really? cool, how do you do that, i thought the PP2 only had like 8 outputs?

Daisy Chains

I just put certain pedals together based on current draw and voltage requirements. Keep in mind, all of my pedals are on all the time and I have not had a problem.

 

[OldSkoolNJ]

I just started Using the Rivera RM1 Routmeister Pedal Effects Controller, It gives you 5 presets in each of the 6 banks for 30 total user presets..
It has 4 different programmable loops for pedals with volume control for signal balancing between different kinds of pedals. + Tuner out with mute and 4 DC Jacks..
It also has 2 TSR Jacks for Amp channel switching, effects loop amp control, It can control 4 amp functions..
And a Midi out for Midi program changes for any of the 5 presets in the 6 banks..
Everything is programmable on it for any of the presets or banks..

I hit 1 button and it changes my amp channel, engages or disengages my effects loop while also changing my midi presets for my Damage Control unit in my loop, while at the same time turning on 1-4 of any of the 4 loops at the same time..
It also has programmable volume control for any of the 4 loops which I use 1 loop with nothing in it for Volume boost for solo's or fills..

I got it directly off of Rivera's website for $299 Dam good deal, Works great ... Made in the USA Too..

http://www.rivera.com/products/footswitches/rm1.php

 

[JC-Tonequest]

You might want to check this out too.
http://www.musicomlab.co.kr/efxmkii.htm

It allows you to run some effects in front of the amp and some in the loop and you can also use 2 of the loops to as function switchers to change channels on your amp.