Palmer Tino 2 amp 1 cab switcher?

  • Thread starter Thread starter saxxamafone
  • Start date Start date
Haven't tried this particular unit, but don't worry about Palmer. They have been in the business of providing high quality gear for years, way before Radial, Bradshaw and others started that build similar gear. I have used their cab sim boxes which carry all of the load of an amp, so they have a good handle on that.
 
Thanks a lot mate.

Looks like a pretty new product so maybe it hasn't gathered much momentum yet
 
Palmer had a precursor to this one, which was more "complicated" because most of the switching was done inside the footswitch of it (it had two parts, the FS and a little box on top of the amps).
Now they've put everything into the 9.5" thing (much more practical) and all you need to do is to use it with a standard footswitch.

Their buffers (splitter to feed both amps) in general are cool (I'm using two of their splitters for my multi preamp rack, transformer isolated) and they are using high current relays to switch the load side of the unit.

I wouldn't hesitate to buy it and it is more practical than the Radial Switchbone and still cheaper.
 
Interested in this....
must check them out...
Thanks for the post
 
Bought one last week. Works flaslessly. Very good unit for a good price.
Footswitch may need unsoldering of LEDs though.
 
You must log in or register to reply here.
Back
Top