Peavey 6505+/6534+ Channel switching issues

[garey77]

When plugged in, the foot switch will only allow access to clean and lead channel, no crunch. When ftsw is unplugged from amp, I can toggle through all channels fine via manually on the amp. Could it be a relay in the amp, or maybe just the foot switch button failed? Help me rig-talk nation-I need da br00tz.

 

[f550maranello2]

Sounds like a bad footswitch or cable.

 

[MYLILSS]

have you tried pushing the crunch switch in, and then seeing if the button the switch worked ? if am not mistaken the clean/crunch switch has to be at a certain position for the pedal to work properly, I d\just don't remember which way

 

[garey77]

have you tried pushing the crunch switch in, and then seeing if the button the switch worked ? if am not mistaken the clean/crunch switch has to be at a certain position for the pedal to work properly, I d\just don't remember which way

Yeah, tried all that. After a bit more of a search it may be a broken trace on the board in the ftsw. I'll have to open it up