Power supplies for pedalboard...

  • Thread starter Thread starter bcole
  • Start date Start date
B

bcole

New member
Looking to pick up a new power supply for my Pedaltrain board. My signal path goes: Ernie Ball Volume Jr, Boss TU-2 tuner, Carl Martin Plexi Tone, Maxon OD 808, Joyo Ultlimate Drive, Danelectro Transparent OD V1, Digitech Hardwire Reverb, Line 6 DL4, Boss RC-20 XL Loop pedal. trying to stay under $200 and was originally looking at the PT Power Train 1250 and the Voodoo 4x4. Any opinions would be greatly appreciated. Thank you for your time.
 
I'll refrain from saying they are "the best" since I haven't tried every other power supply available, but I've had quite a few Voodoo Labs power supplies including the 4x4 and they work perfectly. That would be my #1 choice.
 
I can't comment on the Moen, but I can say from experience of fellow players that PT and Voodoo Labs make great power supplies. You couldn't go wrong with either one.
 
I've been happy with my Voodoo PedalPower2+ except that it is light on outputs jacks/capacity. I don't even have a large board but it is totally maxed-out; I do have 2 pedals running 18V though. On a really large board it seems that you'd have to run multiple PS's as I don't recall seeing any with 12 or so outputs.
 
Can say enough good things about the VL 4x4 I've been using. I've changed my board so much with pedals of different voltages and current draw, but the 4x4 has been able to properly power everything I've thrown at it. It's also fan cooled. I also use a BBE Supa-Charger for over 8 years and never one problem.
 
You must log in or register to reply here.
Back
Top