re: Power conditioner for a pedalboard

  • Thread starter Thread starter university81
  • Start date Start date
university81

university81

Active member
I'm curious about maybe buying a power conditioner mainly for my pedalboard but also for the amp,

on certain shows/places with real dirty power i can get a fairly nasty buzz which is irritating, i'm using a yankee power supply that works great, no hum with clean power, with lights and what not hooked up to the same power grid it can get nasty

would something like this be equivalent to one of the rack power conditioners?

https://www.apc.com/products/resource/i ... tryCode=us

otherwise i guess a furman like unit would be ideal which i can hook up on the floor or even better beneath the pedalboard =)
 
victim5150":17nkotjl said:
This definitely won't fit under your pedalboard but I got one of these for my rig. Been very happy with it. I set it on top of my amp and plug everything into it.
http://www.furmansound.com/product.php? ... d=P-1800PF
Click to expand...

that looks sweet, thanks for the link

the

http://www.furmansound.com/product.php? ... AC-215_PRO

looks like it'll fit underneath the board where the power supply used to be, don't know if they do 220v EU versions, i'll have to see, i won't use it too much only when the noise is terrible so maybe something like the UPS thing would be ok for the occasional gig

actually this would be ideal for simply the noise thing and easier to transport:

http://www.zzounds.com/item--FURSS6B

but in an EU voltage version, time to summon the power of google
 
You must log in or register to reply here.
Back
Top