Stuck a Sustainiac Pro Stealth in a Gibson LP Axcess

  • Thread starter Thread starter peckhart
  • Start date Start date
P

peckhart

Active member
So I recently got a second Axcess with the purpose of setting up the trem to fully float (my other is dive only) and adding a Sustainiac. Tried a Jackson PC1 to work in the sustainer on some tunes but just couldn't get along with the tone and feel of it. Love my Axcess so went this route.
Just got the Sustainiac Pro Stealth installed and it's pretty cool. I went with the option to use push/pulls for the Sustainiac. Also had them wire it up so my install was pretty minimal. Pull the old stuff out, solder up the pickup switch and pickups and a few grounds and boom she was up and running without issue.
I did go with their mini pots as space in the control cavity for the board and battery were a concern. Everything fits great and it's easy to operate.
I have only tested it with my iPad practice setup but I can say I don't hear a change in tone with it activated like I did on the PC1. Should anything need to be tweaked access to the trim pots is a piece of cake.
Not a ton of info out there about these so I thought I would share.
 
tagged.....................take a picture of the install. Am interested in this!
 
As a fellow Axcess owner and I have had several of them over the years, I am really looking forward to seeing how this turned out!

Please post up when you can! Sounds like a great idea! I may get another one to complement the one I currently have and do this mod to it!

:rock:
 
Nice!! Thanks for taking the time to take pictures and post them!

Mark
 
You must log in or register to reply here.
Back
Top