S
stav92
New member
I have a small pedal chain of a compressor, overdrive,flanger, and noise suppresor before my amp/Rack setup. I wanted to buy a suhr koko boost pedal (a clean gain/mid boost with an internal buffer) and also use its internal buffer in my signal chain. I heard buffers are best at the beginning of the chain, but I also tend to keep my compressor first before any boosts/OD's in the chain....would It be best to place the koko boost before the compressor & leave the compressor off whilst the boost is on), or would I be better off keeping the compressor first and using the koko boost + buffer 2nd in line, and have the buffer coming into play from there? I'm not sure how well the compressor will take a clean boost/mid boost before it... I'm not sure what order to put them because typically a buffer goes before a compressor, but boost/OD goes after, yet this pedal is 2-in-1....
