Suhr Minimix good for Slo loop?

  • Thread starter Thread starter bobbtoz
  • Start date Start date
bobbtoz

bobbtoz

Active member
Looking to use my Providence delay pedal in the Slo loop. Anything other suggestions other than the minimix? Basically looking to use my delay pedal and a volume switch (for solo's- made by Mike Soldano) in the loop.

Thanks
Bob T.
 
Yes is the answer to the thread title.

TC HOF and Boss DD20 work pretty well in the loop unless you crank the preamp gain on the OD channel very high; then the loop is noticeable.
 
You asked for other options:

If you want to keep the loop serial, there's a G-Lab piece that will just help you match the levels. There's a Lehle piece that's similar to the MiniMix (makes it a parallel loop) but with the ability to control the send and return levels.
 
I bought my SLO about 3-months ago, and after reading about or trying just about every reccomendation out there, I recently settled for the Badcat Unleash.
With this unit I can run the effects "post" power amp to bypass the loop issues
 
Try an Eventide Timefactor. You can choose the output and input from line or instrument level. Easy...
 
sgill72":1w086h9w said:
Try an Eventide Timefactor. You can choose the output and input from line or instrument level. Easy...

I have noticed that the Timefactor can handle a pretty hot signal.
 
Back
Top