C
C1-ocaster
New member
Anyone use or used this PS?
It's between this one and the Voodoo Labs ISO 5, which is only $110.
The V Labs has:
3 out at 9V with 100mA each.
1 out at 9v or 12v at 300mA.
1 out at 18v at 100mA.
T-Rex has:
4 outs either 9v or 12v with 300mA each.
1 at 9v or 18v, 18v has 150mA.
$150
The 3rd option is the BBE Supa Charger 8 Output High Performance Power Supply at $100.
BBE's site doesn't say this, but I've read users say there are dip switches to set the output to 9v or 12v, and on 1 or 2 outputs you can get 16v at 200mA. But, that setting is not isolated.
If I ran just my Fulldrive 2 on the 16v non isolated out, I wonder if there would be any hum or noise.
Anyone know?
It's a great deal at $100 for 8 outs, and toroidal transformer.
Opinions?
It's between this one and the Voodoo Labs ISO 5, which is only $110.
The V Labs has:
3 out at 9V with 100mA each.
1 out at 9v or 12v at 300mA.
1 out at 18v at 100mA.
T-Rex has:
4 outs either 9v or 12v with 300mA each.
1 at 9v or 18v, 18v has 150mA.
$150
The 3rd option is the BBE Supa Charger 8 Output High Performance Power Supply at $100.
BBE's site doesn't say this, but I've read users say there are dip switches to set the output to 9v or 12v, and on 1 or 2 outputs you can get 16v at 200mA. But, that setting is not isolated.
If I ran just my Fulldrive 2 on the 16v non isolated out, I wonder if there would be any hum or noise.
Anyone know?
It's a great deal at $100 for 8 outs, and toroidal transformer.
Opinions?