TC G force question?

  • Thread starter Thread starter parntz145
  • Start date Start date
P

parntz145

Active member
I see on the back of the g force that all the midi jacks are 5 pin. What I want to know is that can I use my G force to send phantom power to my Ground control pro midi board? If so how?

Thanks.
 
Thanks for the info, but my objective is to get rid of the wall wart.
 
parntz145":vczb7yoh said:
Thanks for the info, but my objective is to get rid of the wall wart.
Click to expand...

you cannot create power from nothing, the g-force was not designed to provide an internal power source for phantom power over MIDI. your only other option is to run a pedal power brick for a pedal board and run the footswitch off of that, utilizing a regular 5 pin to 5 pin MIDI cable.
 
Thats what I was thinking of doing. I just hate these frigging wallwarts in the back of my rack.
 
parntz145":2dyx9emr said:
Thats what I was thinking of doing. I just hate these frigging wallwarts in the back of my rack.
Click to expand...

Yeah, they tend to end up laying in the bottom of the rack during transit..... :aww:

If your rack is big enough, grab you one of those Furman Plug-Lok power strips and secure it inside the rack and plug it into your main rack power.


Steve
 
You must log in or register to reply here.
Back
Top