Think this speaker combo will work OK?

[HilltopExplosion]

This will be ran by a BE100, 6505+ or EVH 5150III, Yeah, or NOPE!

 

[sg guy]

-ditch the "annie" & replace it with a greenback and it will-

 

[Mr. Willy]

Only one way to find out.

 

[JackBootedThug]

clips or it's a bugera.....

 

[Rick Lee]

It will sound great. I just put V30s in the bottom of my EVH 4x12 and it kills. I was using my EVH 100S for the first few days and have been using my 100w Plexi for the last three days. Both sound totally awesome through that cab.

 

[HilltopExplosion]

Bugera... .. Thanks for the comments, life happened and I had to take off before I really asked what I wanted. The speakers are all different watts, but same ohms. I was running the v30s with EVH's.. and they are killer, but you know how it is when you start thinking... I wonder if..... I just wanted to make sure this mix would be ok wattage wise. It's wired parallel series, and wanted to make sure that was the best way to wire the voltage mismatched speakers.

 

[Rick Lee]

How mismatched are the wattages? I don't know if if a higher wattage speaker will take its limit before the signal goes to the lower wattage speaker. But if you play at high band volume and blow a speaker, that can throw your impedance out of whack and kill your OTs.

 

[HilltopExplosion]

How mismatched are the wattages? I don't know if if a higher wattage speaker will take its limit before the signal goes to the lower wattage speaker. But if you play at high band volume and blow a speaker, that can throw your impedance out of whack and kill your OTs.

The v30s are 60 a piece, the anni is 30 and the EVH says 20, but I've read that's not right, but I'm not sure.. The EVH and Anni are in series, the V30s are in series, then the two pairs are in parallel.

 

[sg guy]

-the EVH is actually a 25w speaker, so what you have is a 100w cab-

 

[HilltopExplosion]

-the EVH is actually a 25w speaker, so what you have is a 100w cab-

Thanks! So I should be careful with the 6505+.. since its a 120 watter.

 

[sg guy]

-in "theory" you'll get the usual "@ 100% the amp will be 250 watts" post,..

-guitarist have been using a 100 watt cab with a 100 watt amp since the beginning of time-

-I believe the term is called a "half stack"

-I can't speak for everyone but anything past 4 on my JCM 800 2203KK is painful-

-so ya gotta ask yourself,... when's the last time I dimed my 100 watt amp,..

-I'm a huge 25w greenback fan, there magic comes when there pushed-

-I've never blown one, you can hear a speaker when its at the edge of destruction-

 

[HilltopExplosion]

-in "theory" you'll get the usual "@ 100% the amp will be 250 watts" post,..

-guitarist have been using a 100 watt cab with a 100 watt amp since the beginning of time-

-I believe the term is called a "half stack"

-I can't speak for everyone but anything past 4 on my JCM 800 2203KK is painful-

-so ya gotta ask yourself,... when's the last time I dimed my 100 watt amp,..

-I'm a huge 25w greenback fan, there magic comes when there pushed-

-I've never blown one, you can hear a speaker when its at the edge of destruction-

Thanks! I appreciate the help!