Too Many Options for my pedalboard-need suggestions

[Just Mike]

How would you run this?

Whirlwind Orange Phaser
Boss CE2
CM PlexiTone
Bogner Ecstasy Red
These are all in front of a clean amp so I can use the 2 Distortion boxes' boost functions. I like the sound....I really like the sound.
I'm running 2 Boss DDL's in the amp's loop.
I also have a Voodoo control switcher and a Decibel Eleven Pedal Palette.

I'd like to incorporate the loop hdwe to minimize tap dancing. I was thinking about using the Pedal Palette as my master controller but I'd still need button access of the CM because of the 2 gain levels and the boost button, all of which I use. The Bogner can be controlled by the voodoo switcher. This would require 2 presets on the Pedal Palette.
The problem I see is that I need 2 loopers, one for the phaser and the CE2, and one for the delays in the loop...Or just forget it all and keep on Dancin'.
Suggestions please!

 

[GOHOINC]

Red, plex, phase, ce... in that order I'll have to give the loops a think cus I am not familiar with the pedal pallette

 

[Just Mike]

Hmm...thought this was the place.

 

[Bronco]

How would you run this?

Whirlwind Orange Phaser
Boss CE2
CM PlexiTone
Bogner Ecstasy Red
These are all in front of a clean amp so I can use the 2 Distortion boxes' boost functions. I like the sound....I really like the sound.
I'm running 2 Boss DDL's in the amp's loop.
I also have a Voodoo control switcher and a Decibel Eleven Pedal Palette.

I'd like to incorporate the loop hdwe to minimize tap dancing. I was thinking about using the Pedal Palette as my master controller but I'd still need button access of the CM because of the 2 gain levels and the boost button, all of which I use. The Bogner can be controlled by the voodoo switcher. This would require 2 presets on the Pedal Palette.
The problem I see is that I need 2 loopers, one for the phaser and the CE2, and one for the delays in the loop...Or just forget it all and keep on Dancin'.
Suggestions please!

Boss ES-8. Done.

 

[blackba]

I would go phaser, plexitone, red, chorus. I usually run the chorus in the loop if I a can.

And I would just get a tb looper and go with that. I personally just tap dance.

 

[Just Mike]

I've decided to lay it out thusly;
Run the gtr>tuner, phaser & chorus directly, then continue into the Bogner pedals. Here, I've decided to replace the CM PlexiTone with the Bogner Ecstasy Blue due to it's remote switching capability. I'm using the Decibel eleven Pedal Palette in the loop for the two delays. It's also serving as my master controller that via the voodoo control switcher is controlling the Bogners. I figure I can dance a little to switch the chorus & phaser in and out. Or I might try putting them in the loop and I could then use the PP to control them.

 

[Just Mike]

Yes, I'm going with Phaser, Chorus and both delays in the loop of the amp thereby enabling switching of all via presets on the dB11 PP. Midi PC to the Voodoo control switcher to switch the Bogners.