Using a Minimix I with a Chandler SDE...?

W

wc8485

New member
Would just like to run this by you guys to make sure I've got my setup right for this implemenntation. Just got the Minimix and not had a chance to wire it up yet.

FX unit is a Chandler SDE, no programming only the knobs on the front for adjustments.
The outputs on the Chandler are; Left Mix, Right Mix, Delay out and Dry out.
The Delay Out, output is described as just that "Sends only the delayed signal to source".

I'm thinking I will need to set the Mix on the Chandler to 100% and use the delay out to send it to the Minimix.

Is this the best way to set and run the Chandler to the minimix?

Thanks for the assistance,
Bill
 
Yes, you'd want to use 'Delay Out' only and that signal will travel parallel with the amp's dry signal through the MiniMix.
 
You must log in or register to reply here.
Back
Top