S
stdtheband
New member
Hey Rooster,
I want to order a trailer trash board as described (see below for quote) on your website:
For this player, we prep’d his board so when he recieved it, it was a breeze to finish the wiring.
We installed (1) Main A/C - (2) Courtesy A/C’s (1) Top and (1) side (This is an extra A/C’s for pedals that need A/C power - you can plug your amp in here too)
We hard wired his power supplies to the side A/C. With these accessories he only has to plug in the x-cord to the wall and all of the A/C & D/C are ready to go.
We installed 3 Neutrik locking 1/4” plugs - Guitar ‘IN’ on the right - Stereo ‘OUT’ on the left.
He sent us his True By-Pass loop boxes and we installed them with audio and power.
Voila! He only has to build his audio cables and run his D/C cables to each pedal and within a few hours, he has professional results as seen in the Trailer Trash Gallery.
Only differences:
I want to use a Voodoo Labs PP-2 for some of the pedals... so I will need the mounting kit. I can put the PP-2 in myself. But could you run the wire for it and put the mount in place?
I want (2) top mounted courtesy A/C's as well as the (1) side. (so, it has one extra courtesy A/C)
I will install my own true bypass loops, so I will not need to send them.
I would want a black 30X18 with clear top (blue LED) and see-through Trailer Trash logo accompanied with a soft case.
Please also let me know the price difference if I went with a red one, 30X18 and hard velcro top.
Please let me know (via PM) the price for this semi-wired rig.
I hope I was clear enough.
Thanks!! Your work is awesome!!
I want to order a trailer trash board as described (see below for quote) on your website:
For this player, we prep’d his board so when he recieved it, it was a breeze to finish the wiring.
We installed (1) Main A/C - (2) Courtesy A/C’s (1) Top and (1) side (This is an extra A/C’s for pedals that need A/C power - you can plug your amp in here too)
We hard wired his power supplies to the side A/C. With these accessories he only has to plug in the x-cord to the wall and all of the A/C & D/C are ready to go.
We installed 3 Neutrik locking 1/4” plugs - Guitar ‘IN’ on the right - Stereo ‘OUT’ on the left.
He sent us his True By-Pass loop boxes and we installed them with audio and power.
Voila! He only has to build his audio cables and run his D/C cables to each pedal and within a few hours, he has professional results as seen in the Trailer Trash Gallery.
Only differences:
I want to use a Voodoo Labs PP-2 for some of the pedals... so I will need the mounting kit. I can put the PP-2 in myself. But could you run the wire for it and put the mount in place?
I want (2) top mounted courtesy A/C's as well as the (1) side. (so, it has one extra courtesy A/C)
I will install my own true bypass loops, so I will not need to send them.
I would want a black 30X18 with clear top (blue LED) and see-through Trailer Trash logo accompanied with a soft case.
Please also let me know the price difference if I went with a red one, 30X18 and hard velcro top.
Please let me know (via PM) the price for this semi-wired rig.
I hope I was clear enough.
Thanks!! Your work is awesome!!
... I can't wait to get it. I will post pics after it is complete. Cheers to all and Happy New Year!! 
. I'm clumsy, so it makes a good "trip hazard warning" light system!!!