Wet/Dry/Wet Rigs

[TrentBizzle]

Hello all....
I'm just curious if any of you are using W/D/W rigs out there.
If so I would love to see pics and specs on what exactly you are using.
A W/D/W setup is in my near future, but I'm wanting to get some ideas first.

Thanks!

 

[Tone Ranger]

Just a couple pics with a backing track of my Splawn Quickrod. This was a wet/dry/wet test clip. Used the OS2x12 as dry and two Krank Rev Jr cabs stereo wet. FX used were a Boss Chorus Ensemble, Boss RV-5 Reverb and BBE Sonic Stomp. Wylde Wah used up front.

 

[Little B]

This wet/dry/wet rig has had some changes, but it still does the same things..Ive added a custom shop badcat preamp,vht 2150 & classic, plus more cabs..Any preamp can be sent to any cab, while at the same time a dry signal of any preamp is going to a cab also...AND, you can "morph" all this in real time!....

 

[Beardyman]

This wet/dry/wet rig has had some changes, but it still does the same things..Ive added a custom shop badcat preamp,vht 2150 & classic, plus more cabs..Any preamp can be sent to any cab, while at the same time a dry signal of any preamp is going to a cab also...AND, you can "morph" all this in real time!....

THAT is rediculous!!!

 

[Little B]

Thanks !...this is the rig currently, although the 7 cabs im using wont quite fit in the pic.. ..sorry bout the sideways pic too....looking to pickup an egnater and custom audio rack pre yet...

 

[boof]

Hello all....
I'm just curious if any of you are using W/D/W rigs out there.
If so I would love to see pics and specs on what exactly you are using.
A W/D/W setup is in my near future, but I'm wanting to get some ideas first.

Thanks!

yes. I like it but in a small room it can be a bit too much. I am also happy with a stereo set up using a triaxis in much the same way as described below.

in a nut shell, a bunch of stomp boxes (comp, overdrive and the like) in front of everything ending in channel one of the decimator and then to the bogner input. the mesa 2x12s are fed from the bogner speaker outs.

the fx loop is always on with an mxr eq and then channel two of the decimator and back to the return.

the line out from the line out from the bogner is put into an A/B/Y box that is used to spit it into two (not needed but its what i do) these two cables are then put into the left and right of the g-force (note that kill dry is turned on) and then those are fed into the 2:90. the 2:90 then feeds the 2 1x12 cubes.

The EB volume pedals are used as expression pedals to almost always control the mix of delay and chorus

Hope that helps

Boof.

 

[Inca Roads]

 

[Beardyman]

Holy shiteee, nice rigs fellas