Why aren't you in front of Trump plaza protesting?

[BeerAndPizza]

(1) You're a hypocrite
(2) You're a coward
(3) You're lazy and stupid
(4) You're a shut in and your full diaper has dried and stuck you to your wheelchair
(5) All of the above

 

[Ben Waylin]

So, I have a 1977 MXR Distortion+ pedal.. It's pretty beat up (as you can imagine).

I started the process of restoring it to the original condition, with a couple of minor circuit upgrades..

Namely, full bypass switching, LED indicator, and DC power jack.

 

[Strandberg Junkie]

So, I have a 1977 MXR Distortion+ pedal.. It's pretty beat up (as you can imagine).

I started the process of restoring it to the original condition, with a couple of minor circuit upgrades..

Namely, full bypass switching, LED indicator, and DC power jack.

DUDE! Get yourself some flux cleaner. 90% rubbing alcohol will work too.

 

[Findthetone1]

DUDE! Get yourself some flux cleaner. 90% rubbing alcohol will work too.

Donald(s) "likes" polls

 

[Ben Waylin]

Sometime, back in the 80's I replaced the germanium diodes with red LEDS to get a different clipping characteristic.

 

[Strandberg Junkie]

@PLX

+/- 5% resistors intentional?

 

[JackTheBear]

This is brought to you by:

?Chuckles the Violent Bipolar Racist Homophobic Clown?

 

[Ben Waylin]

@PLX

+/- 5% resistors intentional?

The resistors on the circuit board are all original.

Here's a pic showing the 1977 pot codes:

 

[BeerAndPizza]

So, no one has anything? Lol. As usual.

Where's the forum idiot and his Donnie clown meme?

 

[Ben Waylin]

I re-created the faceplate graphics so I could re-apply them using a slide-on decal.

(The originals were silkscreened).

 

[Picasso]

Donnie the Homosexual Pedo Clown with TDS (using beer, pizza, nuts alts).

 

[Ben Waylin]

The pedal enclosure paint color on this one has become hotly debated, and I'm gonna spill the beans here.

This is an exact color match to the original !

Seymour 16-212
"Old Equipment Yellow"
available from Amazon.com

 

[Findthetone1]

So, no one has anything? Lol. As usual.

Where's the forum idiot and his Donnie clown meme?

Donald "likes" it when "other" clowns weigh-in

 

[DanTravis62]

So, no one has anything? Lol. As usual.

Where's the forum idiot and his Donnie clown meme?

You would have had to make a point in the first place for people to respond to it seriously

Your OP/poll might be the dumbest, most out of touch boomer shitlibbery ever posted on OT (Which is saying something)

and as such, people are going to either mock you, or ignore it completely

 

[Ben Waylin]

This is one of the early "Bud boxes" with the "MXR script" logo embossed into the back cover plate:

(pre-cleaning and paint)

 

[Strandberg Junkie]

The pedal enclosure paint color on this one has become hotly debated, and I'm gonna spill the beans here.

This is an exact color match to the original !

You gonna be able to get a smooth enough surface to accept the really thin script parts of your transfer?
Even a slight texture and you might have trouble.

 

[Ben Waylin]

Plain paper print of faceplate graphics - test fit:

 

[Ben Waylin]

Component test fit and alignment:

 

[JackTheBear]

You would have had to make a point in the first place for people to respond to it seriously

Your OP/poll might be the dumbest, most out of touch boomer shitlibbery ever posted on OT (Which is saying something)

and as such, people are going to either mock you, or ignore it completely

Oh no, Donnie’s the victim, Always the poor victim.

 

[Ben Waylin]

You gonna be able to get a smooth enough surface to accept the really thin script parts of your transfer?
Even a slight texture and you might have trouble.

I'm glad you asked..