Your Reverb/Delay "Standards" Settings... post em!

[ConcreteVampire]

post up "Your" Standard/Suggested settings for VH, Big Rock, AC/DC, favorite artist, Whatever...

I try and run git/Cord/tuner/Head... Ocassionally wah, phaser, boost...otherwise
(Let the house figure out verb, I manage solo-boost from the rig) basically, as dry as possible, just the tubes please... ANOTHER +1 for the Surreal Head, hard bypass on the loop...

But when inserting the Intellifex, or Midiverb... ?

keep it simple, you gear whores, no re-amping! lol...

 

[petejt]

Accutronics Spring Reverb tank- fitted to the amp. I set the Reverb to 2 and leave it there.

 

[Bronco]

Eventide Time Factor:
Tape Echo/300 ms/1 repeat/20%

 

[mboogman]

My Go-to delay setting is with my Boss DM-2. Time maxed out, which is about 350ms, and repeats and echo (mix) set about 10:00. This is already a pretty subtle pedal, so it's just the right touch. As for reverb, I like about a 1.7 second medium hall for most clean playing. No verb for dirty.

 

[ConcreteVampire]

delayed bump...

 

[glpg80]

i actually do not use reverb/delay as a standard setting, reverb soaks up/squashes a tight rhythm sound and delay makes a mess out of odd time signatures.

ill click on a fractional bit of reverb to fill out the lead notes and give a more rounded note, along with a level boost of some sort for the solo itself and to also compensate for the lost-in-the-mix attitude of any reverb in a band setting. but other than that i try to keep the effects off and the amplifiers 100% dry for pre-recording, add in the effects post recording or only during solos live.

 

[ConcreteVampire]

i actually do not use reverb/delay as a standard setting, reverb soaks up/squashes a tight rhythm sound and delay makes a mess out of odd time signatures.

ill click on a fractional bit of reverb to fill out the lead notes and give a more rounded note, along with a level boost of some sort for the solo itself and to also compensate for the lost-in-the-mix attitude of any reverb in a band setting. but other than that i try to keep the effects off and the amplifiers 100% dry for pre-recording, add in the effects post recording or only during solos live.

Definately! that's how i run it, dryer better... I'm jsut looking for what folks look to as they're standard "Wet" settings..
What's the VH Setting for an Intellifex?
that's what I'm curious about.......

 

[megamike]

i actually do not use reverb/delay as a standard setting, reverb soaks up/squashes a tight rhythm sound and delay makes a mess out of odd time signatures.

ill click on a fractional bit of reverb to fill out the lead notes and give a more rounded note, along with a level boost of some sort for the solo itself and to also compensate for the lost-in-the-mix attitude of any reverb in a band setting. but other than that i try to keep the effects off and the amplifiers 100% dry for pre-recording, add in the effects post recording or only during solos live.

Definately! that's how i run it, dryer better... I'm jsut looking for what folks look to as they're standard "Wet" settings..
What's the VH Setting for an Intellifex?
that's what I'm curious about.......

Yeah,what are the delay and reverb settings used on VH1?