Einstein:Rev connection broken,soldering on the pcb, advice?

Hi all,

the cable that connects the reverb spring to the board in my Einstein combo broke. Seems like an easy to fix problem, I already have a new cable lined up and now need to solder the three wires to the corresponding points on the pcb:

[/url][/img]


Unfortunately my soldering iron is a piece of shit and I wasn't able to unsolder the old connections. Using the time until I get a better soldering iron: Any advice or things I should look out for?

Thanks in advance!
Moritz

Skirmish":373w6d75 said:

Hi all,

the cable that connects the reverb spring to the board in my Einstein combo broke. Seems like an easy to fix problem, I already have a new cable lined up and now need to solder the three wires to the corresponding points on the pcb:

[/url][/img]


Unfortunately my soldering iron is a piece of shit and I wasn't able to unsolder the old connections. Using the time until I get a better soldering iron: Any advice or things I should look out for?

Thanks in advance!
Moritz

Click to expand...

Piece of piss for any local tech to do. I'd just get 'er done by a decent amp tech and save the hassles.