Future updates of Torpedo hardware

DrV

Member
Good evening, Guillaume! Amazing update for Torpedo you have released, but it's never a time to stop, isn't it? ;)

Since you made it and mastered the modern style of programming, I'd just like to discuss the possibility of future updates for Torpedo hardware. Here's the list that you may find interesting to implement.

1) Incorporate your Custom reverb from WOS into hardware if possible.

2) Develop a *sag* control for poweramp sims. And also add a switch between emulating tube rectifier and solid state.

3) An option to alter the microphone angle.

4) Make a real presence control that actually change frequencies higher than Treble control does. Same with Bass. Depth control is cool, but it's not always necessary to compress the bass/low mids - just play with the lows of the signal that hits virtual poweramp tubes.


Thanks! Keep on rocking! :rock:
 
Oh, forgot to mention

5) Tone stack before poweramp section. Since Le Preamps have a tone stack before tube gain stage, it may be of use to have a simple tone circuit sim after the preamp (read - before poweramp section). From my experience, if you want to spoil the guitar tone - put an EQ on the final signal (except for technical cuts). The best way to get a good organic tone is to use microphones repositioning and thoughtful gain staging shaped with tone controls.

All in all, it can be useful to control the harmonics content of poweramp distortion, not only preamp.
 
Back
Top