Rig-Talk

Guitars, Gear, Tone!
It is currently Sat, Mar 23, 2019 10:31pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Cab m and IR’s
PostPosted: Fri, Mar 01, 2019 6:40am 
Offline
Hack

Joined: Sat, Feb 23, 2019 3:18am
Posts: 14
Are you human?: 951
Few questions re loading Celestion IR into the Cab M.

I purchased a lot for use with my iPad and want to get them into the cab m but totally stumped how to do it.

Can I load straight to the memory card, if so do I take it out of cab m and use with PC or with Cab M connected to a PC.

If the IR is on the memory card do I still get to keep all the cabs already in the cab m or do I need to delete to make room for them.

What rate is best? The Celestion website has a download for Toroedo cab at 48 kHz but I thought Cab M was 96Khz.

Not much info in the manual about this
Any help really appreciated

Duncan


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Fri, Mar 01, 2019 7:56am 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 1916
Location: France
Are you human?: 951
Hi Duncan,

first of all, do you talk about the Celestion cabinets in the Tn format or their wave files?

If you talk about the format, the frequency is not really relevant but I'll talk to them about what they put on the website, anyway you will need Torpedo remote our your computer and load the cabinets into the internal memory. As the memory is full with 32 cabinets you will have to remove a few (don't worry they are still in your license and on your computer and cab be downloaded anytime).

On the SD card you can load 3rd party IRs such as the Celestion cabinets but in wave file format, thus my initial question. ;)

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two Notes Help Desk


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Fri, Mar 01, 2019 9:06am 
Offline
Hack

Joined: Sat, Feb 23, 2019 3:18am
Posts: 14
Are you human?: 951
guillaume_pille wrote:
Hi Duncan,

first of all, do you talk about the Celestion cabinets in the Tn format or their wave files?

If you talk about the format, the frequency is not really relevant but I'll talk to them about what they put on the website, anyway you will need Torpedo remote our your computer and load the cabinets into the internal memory. As the memory is full with 32 cabinets you will have to remove a few (don't worry they are still in your license and on your computer and cab be downloaded anytime).

On the SD card you can load 3rd party IRs such as the Celestion cabinets but in wave file format, thus my initial question. ;)



Hi,

That makes sense now.
I couldn’t load in the IR on torpedo remote as the cab m memory is full,
I tried the TN format and will stick with that when I try again.

Looking at your reply I will stick to loading on the SD card for now.

Thanks for all your hail again,

Must say I’m very impressed with both the Cab M and support.


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Fri, Mar 01, 2019 11:31am 
Offline
Hack

Joined: Sat, Feb 23, 2019 3:18am
Posts: 14
Are you human?: 951
Tried again and can get the IR on the SD card but when I try and access it I get the following

No valid data.

Tried both the Wav file and the TN

I’m downloading from the Celestion site to a pc folder

Connect Cab M and mount the SD card

Open the file on my computer as usb drive

Drag and drop to usb drive

After I mount and restart the cab m the IR show up but when I try an access I get the No valid data message


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Sun, Mar 03, 2019 12:59pm 
Offline
Hack

Joined: Sat, Feb 23, 2019 3:18am
Posts: 14
Are you human?: 951
After opening a ticket with the help,team I had a revelation..
Needed to load on SD card via the two notes impulse folder.
Also was trying to acces the ir directly form the sd card,
Hint form the help team was to load the ir via the miking section.

Soreted now and have my Celestion irs to use as well as the two notes cabs

🎉


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Sun, Mar 03, 2019 1:26pm 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 1916
Location: France
Are you human?: 951
Hi ACD123 thank you for the feedback, it could help other users. ;)

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two Notes Help Desk


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Mon, Mar 04, 2019 4:05pm 
Offline
Hack

Joined: Sat, Feb 23, 2019 3:18am
Posts: 14
Are you human?: 951
Also

You can load the ir directly from the sd card and use it.

You have to set the miking section to ‘ir loader’ then go to the memory card.

Easier as you have all of the ir in a list and can scroll down then access by pressing the enter dial.

:thumbsup:


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group - Terms of Use