Rig-Talk
https://www.rig-talk.com/forum/

Cab m and IR’s
https://www.rig-talk.com/forum/viewtopic.php?f=75&t=201990
Page 1 of 1

Author:  ACD123 [ Fri, Mar 01, 2019 6:40am ]
Post subject:  Cab m and IR’s

Few questions re loading Celestion IR into the Cab M.

I purchased a lot for use with my iPad and want to get them into the cab m but totally stumped how to do it.

Can I load straight to the memory card, if so do I take it out of cab m and use with PC or with Cab M connected to a PC.

If the IR is on the memory card do I still get to keep all the cabs already in the cab m or do I need to delete to make room for them.

What rate is best? The Celestion website has a download for Toroedo cab at 48 kHz but I thought Cab M was 96Khz.

Not much info in the manual about this
Any help really appreciated

Duncan

Author:  guillaume_pille [ Fri, Mar 01, 2019 7:56am ]
Post subject:  Re: Cab m and IR’s

Hi Duncan,

first of all, do you talk about the Celestion cabinets in the Tn format or their wave files?

If you talk about the format, the frequency is not really relevant but I'll talk to them about what they put on the website, anyway you will need Torpedo remote our your computer and load the cabinets into the internal memory. As the memory is full with 32 cabinets you will have to remove a few (don't worry they are still in your license and on your computer and cab be downloaded anytime).

On the SD card you can load 3rd party IRs such as the Celestion cabinets but in wave file format, thus my initial question. ;)

Author:  ACD123 [ Fri, Mar 01, 2019 9:06am ]
Post subject:  Re: Cab m and IR’s

guillaume_pille wrote:
Hi Duncan,

first of all, do you talk about the Celestion cabinets in the Tn format or their wave files?

If you talk about the format, the frequency is not really relevant but I'll talk to them about what they put on the website, anyway you will need Torpedo remote our your computer and load the cabinets into the internal memory. As the memory is full with 32 cabinets you will have to remove a few (don't worry they are still in your license and on your computer and cab be downloaded anytime).

On the SD card you can load 3rd party IRs such as the Celestion cabinets but in wave file format, thus my initial question. ;)



Hi,

That makes sense now.
I couldn’t load in the IR on torpedo remote as the cab m memory is full,
I tried the TN format and will stick with that when I try again.

Looking at your reply I will stick to loading on the SD card for now.

Thanks for all your hail again,

Must say I’m very impressed with both the Cab M and support.

Author:  ACD123 [ Fri, Mar 01, 2019 11:31am ]
Post subject:  Re: Cab m and IR’s

Tried again and can get the IR on the SD card but when I try and access it I get the following

No valid data.

Tried both the Wav file and the TN

I’m downloading from the Celestion site to a pc folder

Connect Cab M and mount the SD card

Open the file on my computer as usb drive

Drag and drop to usb drive

After I mount and restart the cab m the IR show up but when I try an access I get the No valid data message

Author:  ACD123 [ Sun, Mar 03, 2019 12:59pm ]
Post subject:  Re: Cab m and IR’s

After opening a ticket with the help,team I had a revelation..
Needed to load on SD card via the two notes impulse folder.
Also was trying to acces the ir directly form the sd card,
Hint form the help team was to load the ir via the miking section.

Soreted now and have my Celestion irs to use as well as the two notes cabs

🎉

Author:  guillaume_pille [ Sun, Mar 03, 2019 1:26pm ]
Post subject:  Re: Cab m and IR’s

Hi ACD123 thank you for the feedback, it could help other users. ;)

Author:  ACD123 [ Mon, Mar 04, 2019 4:05pm ]
Post subject:  Re: Cab m and IR’s

Also

You can load the ir directly from the sd card and use it.

You have to set the miking section to ‘ir loader’ then go to the memory card.

Easier as you have all of the ir in a list and can scroll down then access by pressing the enter dial.

:thumbsup:

Author:  chrismilne [ Mon, Oct 14, 2019 8:01am ]
Post subject:  Re: Cab m and IR’s

Is there a max size memory card you can use?

What is the most compatible/recommended card?

Thanks!

Author:  guillaume_pille [ Mon, Oct 14, 2019 8:53am ]
Post subject:  Re: Cab m and IR’s

Hi chrismilne, any reputable brand will work, up to 32GB SDHC.

Author:  chrismilne [ Mon, Oct 14, 2019 11:35am ]
Post subject:  Re: Cab m and IR’s

guillaume_pille wrote:
Hi chrismilne, any reputable brand will work, up to 32GB SDHC.


Thank you, ordered one!

Author:  guillaume_pille [ Tue, Oct 15, 2019 2:01am ]
Post subject:  Re: Cab m and IR’s

How many BILLIONS of files do you plan to host on that card?? ha ha

Author:  chrismilne [ Wed, Oct 16, 2019 10:05am ]
Post subject:  Re: Cab m and IR’s

guillaume_pille wrote:
How many BILLIONS of files do you plan to host on that card?? ha ha


Haha, it is ridiculous, but its only $7, what can I do...it seem fiscally responsible for the extra $1? :)

It is probably counter intuitive, even on the pc after 5 min's it's hard to tell which cab impulse I even like better...switching through them gives quick ear fatigue.

Author:  chrismilne [ Wed, Oct 16, 2019 5:39pm ]
Post subject:  Re: Cab m and IR’s

ACD123 wrote:
After opening a ticket with the help,team I had a revelation..
Needed to load on SD card via the two notes impulse folder.
Also was trying to acces the ir directly form the sd card,
Hint form the help team was to load the ir via the miking section.

Soreted now and have my Celestion irs to use as well as the two notes cabs

🎉


i don't get this, i can't figure out how to load the IR's on to the SD card (do i connect it like a drive? can i load them while it's inside the CAB M?)

Then how do I read them from the remote software? How from the hardware.

I downloaded the wav files from Celestion...that is the only format right? The two notes download from their site is still just wav files, i guess just cut to fit the 200ms limit.

It would be nice if this was added the manual in better detail.

Author:  guillaume_pille [ Fri, Oct 18, 2019 4:08am ]
Post subject:  Re: Cab m and IR’s

Hi chrismilne,

are these instructions not clear enough? Let me know I'll have the guys rework it.

Quote:
4.3.6.3 Memory card browser


The Torpedo C.A.B. M comes with a memory card of 256 MB to have access to more third party IRs in the IR loader mode. Here you can browse the IRs you have loaded on the memory card (only 48KHz .wav files are displayed). If you need to load other formats of IR files, please read below on how to do so using Torpedo Remote.

4.3.6.4 Memory card mount


When your Torpedo C.A.B M is connected to a computer, you can view the content of the memory card by pressing Enter (the right encoder knob) to mount the memory card. Your pedal will then show up as a storage unit in your computer.
When the memory card is mounted, the interface of the C.A.B. M is locked, in order not to interfere with the computer. Press ENTER once you finished editing, copying, moving or erasing files to unlock the C.A.B M.


http://wiki.two-notes.com/doku.php?id=torpedo_cab_m:torpedo_c.a.b._m_user_s_manual

Author:  chrismilne [ Fri, Oct 18, 2019 8:32pm ]
Post subject:  Re: Cab m and IR’s

i guess i didn't read the onboard menu section well enough, i was thinking everything was accessible via the Torpedo Remote software. I expected the IR's i loaded on the card to show up in the IR Loader in Torpedo remote, but it seems to load IR's in Torpedo remote you are browsing them on your computer, but to load them on the device through the Menu you use the memory card browser you referenced above, is that right?

It also looks like when browsing on the device it takes everything in folders you copied on the card and cycles through 1x1 as though there were no folders. I can see where trying to put a ton of IR's on here would be a bit counterproductive. I'lll have to spend some more time auditioning them on the computer and picking my favorites and only putting those on the memory card.

I plan to use this 99% of the time via the remote software as i'm mostly playing/recording at home, not traveling and playing.

Thanks, I think it was on me for not reading more carefully, thanks again for responding!

Author:  guillaume_pille [ Sat, Oct 19, 2019 3:52am ]
Post subject:  Re: Cab m and IR’s

Quote:
i guess i didn't read the onboard menu section well enough, i was thinking everything was accessible via the Torpedo Remote software. I expected the IR's i loaded on the card to show up in the IR Loader in Torpedo remote, but it seems to load IR's in Torpedo remote you are browsing them on your computer, but to load them on the device through the Menu you use the memory card browser you referenced above, is that right?


yes because we do not use the same protocole for the internal memory and the SD Card there are 2 different ways to access the memories. We will release an update to unify all that some day.

I agree that the instructions were a bit hidden, I already asked that they are put more clearly in the "3rd party IRs" section.

Author:  ndronn [ Wed, Nov 20, 2019 3:16am ]
Post subject: 

Hello! Tell me, what is the length allowed for downloadable IR files?

Sorry for my English, i'm using google translate.

Author:  guillaume_pille [ Wed, Nov 20, 2019 3:50am ]
Post subject:  Re: Cab m and IR’s

the format we read is mono 48KHz 24 bits and up to 200ms, but if your file is longer Torpedo Remote will just truncate it before sending it to the unit.

Author:  ndronn [ Thu, Nov 21, 2019 4:11pm ]
Post subject:  Re: Cab m and IR’s

guillaume_pille wrote:
the format we read is mono 48KHz 24 bits and up to 200ms, but if your file is longer Torpedo Remote will just truncate it before sending it to the unit.

this length is correct for Torpedo Cab M?

Author:  dilhoo [ Fri, Nov 22, 2019 3:06am ]
Post subject:  Re: Cab m and IR’s

@ndronn For C.A.B. M you can use IRs from 20ms to 200 ms. If the IRs are longer than 200 ms they will be trucated by torpedo Remote.

Author:  21seven [ Fri, Sep 25, 2020 11:36am ]
Post subject:  Re: Cab m and IR’s

I find it extremely disappointing that you are crippling the CAB M - which is really good - by not allowing me to store Two Notes cabinets in the memory card. No offence, but this must be one of the most bizarre things I ever seen (and I am half a century old!).
Why should I keep juggling with a 32 cabs in the internal memory card, unable to load all the Two Notes cabs I bought from you, while having an empty memory card? (I do not use third party IRs).
You are very much encouraging CAB M users to buy third party cabinets instead of the ones Two Notes sell. It really does not make any sense and really diminishes your product.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/