Rig-Talk
https://www.rig-talk.com/forum/

CAB M and bluetooth = 10 seconds to change a param
https://www.rig-talk.com/forum/viewtopic.php?f=75&t=207468
Page 1 of 1

Author:  philmartins [ Sun, Nov 03, 2019 1:07pm ]
Post subject:  CAB M and bluetooth = 10 seconds to change a param

Hi,

I use the CAB M between amp and column. I am using the remote app on a Huawei P20 Pro.

Everything is updated correctly (firmware on the CAB M, last android version on the phone).

When changing a parameter on the phone it takes like 10 seconds before I can hear the change ...

I am placed like 5 meters away from the amp (and the CAB M).

Is it normal? Does it work better with iOS?

Thanks for your return.

Cheers,

PHil

Author:  guillaume_pille [ Mon, Nov 04, 2019 4:37am ]
Post subject:  Re: CAB M and bluetooth = 10 seconds to change a param

Hi philmartins,

there are documented issue between Huawei and Bluettoth LE (the open protocole that we use) because of some choices made by Huawei in terms of hardware architecture. We are trying to make it work better but it's a pain, and Huawei doesn't seem to care.

CAB m works perfectly with iOS, yes.

Author:  philmartins [ Mon, Nov 04, 2019 9:15am ]
Post subject:  Re: CAB M and bluetooth = 10 seconds to change a param

okay I will give it a try ...

Author:  philmartins [ Tue, Nov 05, 2019 3:48am ]
Post subject:  Re: CAB M and bluetooth = 10 seconds to change a param

okay so no issue with iOS. It works perfectly.

With Android it starts well and then after a while the performance is getting worse ... until the point where I have to wait 8 seconds to hear the change.

When I change on the cab m it is direct but 8 seconds from the phone.

Will stay with iOS for this ...

Author:  guillaume_pille [ Wed, Nov 06, 2019 3:32am ]
Post subject:  Re: CAB M and bluetooth = 10 seconds to change a param

Hi philmartins, it's not Android, it's Huawei. Most of our users actually have android phones and it's perfectly OK.

Author:  philmartins [ Wed, Nov 06, 2019 3:50am ]
Post subject:  Re: CAB M and bluetooth = 10 seconds to change a param

okay thanks for the clarification. :rock:

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/