Rig-Talk

Guitars, Gear, Tone!
It is currently Sat, Apr 04, 2020 6:31am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Thu, Jan 09, 2020 4:55pm 
Offline
Plank Cranker Wanker

Joined: Sun, Jun 25, 2006 1:13pm
Posts: 1258
Are you human?: 951
I am starting to record with a local engineer that uses the Suhr Reactive load and we are doing A/B tests vs the Studio to look for the desired tones.
To make the comparison more equal the Suhr and studio were run into the two notes WOS which had the same amp and settings making the Suhr and studio load boxes essentially.

The recorded Suhr reactive tracts are much louder (with no clipping or issues) then when we try to record the exact same guitar/amp set up with my Studio. We have to push the Studio input to high yellow and outputs to high yellow/red line to get the same volume as the Suhr into the DAW. He said it's like there is at least a 10db hold on the studio or "like it is only sending a commercial grade (not studio grade) signal out" to the DAW.

With my novice recording skills, I always thought that the Studio volume has been low when I've tracked at home - needing to really push amplifier and Studio input/output gain to match the Neural DSP plug-ins volumes I have been doing scratch tracks with.

What am I doing wrong or missing? Did I accidentally push a dampen or dB cut button somewhere or something similar?

Hope this makes sense as a question, thanks.

_________________
Band: Pleasure to Burn https://pleasuretoburnband.com
Stuff: JP2C, JJ100, Fortin Cali, Wizard; Splawn & Friedman cabs; TAG's, Vigier, McNaught & Gibby LP's


Top
 Profile  
Reply with quote  
PostPosted: Thu, Jan 30, 2020 5:55am 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 2044
Location: France
Are you human?: 951
Hi Drkorey,

I feel that we already answered you somewhere else.

the typical recording level you should work with is -16dB FS, and the Torpedo Sudio specs are referenced in the manual:

ANALOG Outputs 2 x XLR balanced
Impedance: 600 Ohms balanced, 300 Ohms unbalanced
Maximum output level:
• (no load, balanced): 11.2 dBu
• (10 kOhm load, balanced): 10.7 dBu
• (no load, unbalanced): 5.1 dBu
• (10 kOhm load, unbalanced): 4.9 dBu

It's perfectly compatible with a studio environment, and more importantly, rather than the absolute level you should look at the signal/noise ratio, and the Studio ha a very low THD noise level. Having a high recording level means nothing if the noise is high, too.

You can push hard the Studio input before clipping, we designed the bragraph to keep you away from clipping the input (that's called the headroom), so even going to the orange zone is safe, it totally depends on how dynamic your amp is.

Finally, the Suhr has a 1/4" output, so I guess you go into a line input, but do you plug the balanced XLR of the Studio into a mic or line input in your desk? have you tried the digital outs?

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two notes Help Desk


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group - Terms of Use