Rig-Talk

Guitars, Gear, Tone!
It is currently Sun, Feb 23, 2020 12:22pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Wed, Jan 22, 2020 1:25pm 
Offline
Hack

Joined: Wed, Jan 22, 2020 12:12pm
Posts: 1
Are you human?: 951
Hi, I have a Captor 4 ohm load and two Mesa Boogie amps, a Mark IIC+ 60/100W and a Mark V. The Captor works fine with the Mark V, but when using it as a load with the older IIC+ amp, it causes the power stage to noticeably clip. This "clipping distortion" is most evident on a clean preamp setting on Ch 1. When recording with the DI interface, it's hard to eliminate with any cabinet emulation.

I have an older resistive based Power Soak and with the IIC+, it doesn't exhibit the "power stage clipping". Originally I thought something was wrong with the IIC+ and brought the amp/Captor setup to Mesa. After a good deal of testing, we did identify that the amp was just not "happy" with the Captor load, especially in 60W mode, 100W mode was improved.

I understand the simple answer would be "it's your amp", but I can't think of anyone else who would understand reactive loads better then Two Notes. I'm hoping for any suggestions to try to improve the compatibility. I did experiment with slaving the Captor off of the Power Soak (set at a minimal attenuation level) to alter the overall load impedance and that actually improved the "clipping", but not surprisingly this arrangement "EQ'd" the tone where there was a loss of the lower frequencies. Hope this makes sense, Thanks in Advance, Tom


Top
 Profile  
Reply with quote  
PostPosted: Thu, Jan 30, 2020 6:28am 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 2028
Location: France
Are you human?: 951
Hi tom,

thank you for your feedback.

I don't know how Mesa does the power scaling but it's possible that it influences the output impedance of the amp, and it's reaction to our load design can probably have an impact on how the amp reacts.

Sadly I don't have a IIC+ to make tests here (would love too ^^). :/

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two notes Help Desk


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group - Terms of Use