Vox AC30 with the Captor X
Page 1 of 1

Author:  chappie69 [ Mon, Jul 13, 2020 8:59am ]
Post subject:  Vox AC30 with the Captor X

Hey there,

So I have an AC30C2....the one with greenbacks. Love it! Master volume does a nice job taming it....but my question concerns using it with a Captor X. On the back of the Vox are two jacks, one for an extension cab and one for an external cab and an Ohm switch: 8 or 16. Is my thinking correct that if I connect the Vox to the Captor X via the external speaker jack and choose 8 ohms then the impedance match will be ok??? Also, using the external jack silences the internal speakers of the Vox. I know that I could run the Vox into the Captor X the usual way and more than likely things would be just fine. But I'm just checking my options.



Author:  guillaume_pille [ Mon, Jul 27, 2020 10:31am ]
Post subject:  Re: Vox AC30 with the Captor X

Hi chappie69,

if the original speaker in the combo is 8, it's safe to say that you'll be just fine with he Captor X on the ext output. Please take a look at the amp manual just in case.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group