Switch to full style
Guillaume Pille from Two Notes is here on board to answer all your questions about their amp simulators!
Post a reply

Cab M not simulating virtual cabinet when using AMP + Cab

Sun, Aug 02, 2020 2:04am

hey there! i hooked up may cab m between my power amp (Speaker out) and my Cab, as described in the manual, but the Cab M doesnt simulate the virtual cabinets or when using IRs the sound that comes out of the cab is the same! ... am i doing something wrong?? :doh: the Cab M works fine only in the DAW ... i kinda hoped it would change my amps cab sound live... that would have been cool! .. any help?

Re: Cab M not simulating virtual cabinet when using AMP + Ca

Mon, Aug 03, 2020 5:28am

Hi Richard20,

the connexion between the amp and the cabinet through the CAB M is actually a bypass, there is no sound processing from the CAB % applied to your signal.

You can get the processed signal through the Line/XLR or headphones out on the CAB M.

This being said, it would be weird to process the amp signal with a speaker sim and miking before sending the result to a regular guitar cabinet. The sound would be pretty bad, to say the least, because you'd be cascading two different cabinet sounds. ;)
Post a reply