Bob Savage
Well-known member
Hello,
I bought some cab sims and tested out the WOS application yesterday but am encountering something that I don't know whether is normal.
System specs are i7 which I believe is a 6700, 32 GB of RAM, was using all SSD drives for this test and I'm using Samplitude Pro X4.
The first thing I encountered was that when I used WOS as a channel insert, it wasn't getting input. I forget my monitoring settings, but every other insert works for input monitoring right away but WOS didn't. For this I did not troubleshoot since it worked for playback of a recorded track, figuring I'd deal with this later if I keep using WOS.
The primary issue is that using it for a channel insert, right clicking to open the WOS plugin takes 5-10 seconds every time. It's very, very slow to open and I've done some searching on the web, finding only posts complaining of this symptom a couple years ago, but figured I'd post here to see if you have any advice because I know somebody using WOS on an older Apple who isn't seeing this behavior. As a side note, the plugin does seem fairly heavy on computer resources (CPU/RAM) and possibly the ASIO interface (I had a lost buffer error - which I haven't seen in years), but I can troubleshoot that later.
All that said, I really like the sounds I'm getting with the cab simulators and hope this can be resolved because I'm getting some juicy tones using my Deliverance 60 through the Power Station II into WOS with the Deliverance cab sims.
Thank you
I bought some cab sims and tested out the WOS application yesterday but am encountering something that I don't know whether is normal.
System specs are i7 which I believe is a 6700, 32 GB of RAM, was using all SSD drives for this test and I'm using Samplitude Pro X4.
The first thing I encountered was that when I used WOS as a channel insert, it wasn't getting input. I forget my monitoring settings, but every other insert works for input monitoring right away but WOS didn't. For this I did not troubleshoot since it worked for playback of a recorded track, figuring I'd deal with this later if I keep using WOS.
The primary issue is that using it for a channel insert, right clicking to open the WOS plugin takes 5-10 seconds every time. It's very, very slow to open and I've done some searching on the web, finding only posts complaining of this symptom a couple years ago, but figured I'd post here to see if you have any advice because I know somebody using WOS on an older Apple who isn't seeing this behavior. As a side note, the plugin does seem fairly heavy on computer resources (CPU/RAM) and possibly the ASIO interface (I had a lost buffer error - which I haven't seen in years), but I can troubleshoot that later.
All that said, I really like the sounds I'm getting with the cab simulators and hope this can be resolved because I'm getting some juicy tones using my Deliverance 60 through the Power Station II into WOS with the Deliverance cab sims.
Thank you