Vox AC30 with the Captor X

chappie69

New member
Hey there,

So I have an AC30C2....the one with greenbacks. Love it! Master volume does a nice job taming it....but my question concerns using it with a Captor X. On the back of the Vox are two jacks, one for an extension cab and one for an external cab and an Ohm switch: 8 or 16. Is my thinking correct that if I connect the Vox to the Captor X via the external speaker jack and choose 8 ohms then the impedance match will be ok??? Also, using the external jack silences the internal speakers of the Vox. I know that I could run the Vox into the Captor X the usual way and more than likely things would be just fine. But I'm just checking my options.

Thanks!

Randy
 
Hi chappie69,

if the original speaker in the combo is 8, it's safe to say that you'll be just fine with he Captor X on the ext output. Please take a look at the amp manual just in case.
 
Back
Top