Rig-Talk

Guitars, Gear, Tone!
It is currently Sun, Dec 08, 2019 3:10pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 20 posts ] 
Author Message
 Post subject: Cab m and IR’s
PostPosted: Fri, Mar 01, 2019 6:40am 
Offline
Hack

Joined: Sat, Feb 23, 2019 3:18am
Posts: 16
Are you human?: 951
Few questions re loading Celestion IR into the Cab M.

I purchased a lot for use with my iPad and want to get them into the cab m but totally stumped how to do it.

Can I load straight to the memory card, if so do I take it out of cab m and use with PC or with Cab M connected to a PC.

If the IR is on the memory card do I still get to keep all the cabs already in the cab m or do I need to delete to make room for them.

What rate is best? The Celestion website has a download for Toroedo cab at 48 kHz but I thought Cab M was 96Khz.

Not much info in the manual about this
Any help really appreciated

Duncan


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Fri, Mar 01, 2019 7:56am 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 2007
Location: France
Are you human?: 951
Hi Duncan,

first of all, do you talk about the Celestion cabinets in the Tn format or their wave files?

If you talk about the format, the frequency is not really relevant but I'll talk to them about what they put on the website, anyway you will need Torpedo remote our your computer and load the cabinets into the internal memory. As the memory is full with 32 cabinets you will have to remove a few (don't worry they are still in your license and on your computer and cab be downloaded anytime).

On the SD card you can load 3rd party IRs such as the Celestion cabinets but in wave file format, thus my initial question. ;)

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two notes Help Desk


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Fri, Mar 01, 2019 9:06am 
Offline
Hack

Joined: Sat, Feb 23, 2019 3:18am
Posts: 16
Are you human?: 951
guillaume_pille wrote:
Hi Duncan,

first of all, do you talk about the Celestion cabinets in the Tn format or their wave files?

If you talk about the format, the frequency is not really relevant but I'll talk to them about what they put on the website, anyway you will need Torpedo remote our your computer and load the cabinets into the internal memory. As the memory is full with 32 cabinets you will have to remove a few (don't worry they are still in your license and on your computer and cab be downloaded anytime).

On the SD card you can load 3rd party IRs such as the Celestion cabinets but in wave file format, thus my initial question. ;)



Hi,

That makes sense now.
I couldn’t load in the IR on torpedo remote as the cab m memory is full,
I tried the TN format and will stick with that when I try again.

Looking at your reply I will stick to loading on the SD card for now.

Thanks for all your hail again,

Must say I’m very impressed with both the Cab M and support.


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Fri, Mar 01, 2019 11:31am 
Offline
Hack

Joined: Sat, Feb 23, 2019 3:18am
Posts: 16
Are you human?: 951
Tried again and can get the IR on the SD card but when I try and access it I get the following

No valid data.

Tried both the Wav file and the TN

I’m downloading from the Celestion site to a pc folder

Connect Cab M and mount the SD card

Open the file on my computer as usb drive

Drag and drop to usb drive

After I mount and restart the cab m the IR show up but when I try an access I get the No valid data message


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Sun, Mar 03, 2019 12:59pm 
Offline
Hack

Joined: Sat, Feb 23, 2019 3:18am
Posts: 16
Are you human?: 951
After opening a ticket with the help,team I had a revelation..
Needed to load on SD card via the two notes impulse folder.
Also was trying to acces the ir directly form the sd card,
Hint form the help team was to load the ir via the miking section.

Soreted now and have my Celestion irs to use as well as the two notes cabs

🎉


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Sun, Mar 03, 2019 1:26pm 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 2007
Location: France
Are you human?: 951
Hi ACD123 thank you for the feedback, it could help other users. ;)

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two notes Help Desk


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Mon, Mar 04, 2019 4:05pm 
Offline
Hack

Joined: Sat, Feb 23, 2019 3:18am
Posts: 16
Are you human?: 951
Also

You can load the ir directly from the sd card and use it.

You have to set the miking section to ‘ir loader’ then go to the memory card.

Easier as you have all of the ir in a list and can scroll down then access by pressing the enter dial.

:thumbsup:


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Mon, Oct 14, 2019 8:01am 
Offline
Hack

Joined: Sat, Sep 05, 2015 10:48am
Posts: 15
Are you human?: 951
Is there a max size memory card you can use?

What is the most compatible/recommended card?

Thanks!


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Mon, Oct 14, 2019 8:53am 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 2007
Location: France
Are you human?: 951
Hi chrismilne, any reputable brand will work, up to 32GB SDHC.

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two notes Help Desk


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Mon, Oct 14, 2019 11:35am 
Offline
Hack

Joined: Sat, Sep 05, 2015 10:48am
Posts: 15
Are you human?: 951
guillaume_pille wrote:
Hi chrismilne, any reputable brand will work, up to 32GB SDHC.


Thank you, ordered one!


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Tue, Oct 15, 2019 2:01am 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 2007
Location: France
Are you human?: 951
How many BILLIONS of files do you plan to host on that card?? ha ha

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two notes Help Desk


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Wed, Oct 16, 2019 10:05am 
Offline
Hack

Joined: Sat, Sep 05, 2015 10:48am
Posts: 15
Are you human?: 951
guillaume_pille wrote:
How many BILLIONS of files do you plan to host on that card?? ha ha


Haha, it is ridiculous, but its only $7, what can I do...it seem fiscally responsible for the extra $1? :)

It is probably counter intuitive, even on the pc after 5 min's it's hard to tell which cab impulse I even like better...switching through them gives quick ear fatigue.


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Wed, Oct 16, 2019 5:39pm 
Offline
Hack

Joined: Sat, Sep 05, 2015 10:48am
Posts: 15
Are you human?: 951
ACD123 wrote:
After opening a ticket with the help,team I had a revelation..
Needed to load on SD card via the two notes impulse folder.
Also was trying to acces the ir directly form the sd card,
Hint form the help team was to load the ir via the miking section.

Soreted now and have my Celestion irs to use as well as the two notes cabs

🎉


i don't get this, i can't figure out how to load the IR's on to the SD card (do i connect it like a drive? can i load them while it's inside the CAB M?)

Then how do I read them from the remote software? How from the hardware.

I downloaded the wav files from Celestion...that is the only format right? The two notes download from their site is still just wav files, i guess just cut to fit the 200ms limit.

It would be nice if this was added the manual in better detail.


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Fri, Oct 18, 2019 4:08am 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 2007
Location: France
Are you human?: 951
Hi chrismilne,

are these instructions not clear enough? Let me know I'll have the guys rework it.

Quote:
4.3.6.3 Memory card browser


The Torpedo C.A.B. M comes with a memory card of 256 MB to have access to more third party IRs in the IR loader mode. Here you can browse the IRs you have loaded on the memory card (only 48KHz .wav files are displayed). If you need to load other formats of IR files, please read below on how to do so using Torpedo Remote.

4.3.6.4 Memory card mount


When your Torpedo C.A.B M is connected to a computer, you can view the content of the memory card by pressing Enter (the right encoder knob) to mount the memory card. Your pedal will then show up as a storage unit in your computer.
When the memory card is mounted, the interface of the C.A.B. M is locked, in order not to interfere with the computer. Press ENTER once you finished editing, copying, moving or erasing files to unlock the C.A.B M.


http://wiki.two-notes.com/doku.php?id=torpedo_cab_m:torpedo_c.a.b._m_user_s_manual

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two notes Help Desk


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Fri, Oct 18, 2019 8:32pm 
Offline
Hack

Joined: Sat, Sep 05, 2015 10:48am
Posts: 15
Are you human?: 951
i guess i didn't read the onboard menu section well enough, i was thinking everything was accessible via the Torpedo Remote software. I expected the IR's i loaded on the card to show up in the IR Loader in Torpedo remote, but it seems to load IR's in Torpedo remote you are browsing them on your computer, but to load them on the device through the Menu you use the memory card browser you referenced above, is that right?

It also looks like when browsing on the device it takes everything in folders you copied on the card and cycles through 1x1 as though there were no folders. I can see where trying to put a ton of IR's on here would be a bit counterproductive. I'lll have to spend some more time auditioning them on the computer and picking my favorites and only putting those on the memory card.

I plan to use this 99% of the time via the remote software as i'm mostly playing/recording at home, not traveling and playing.

Thanks, I think it was on me for not reading more carefully, thanks again for responding!


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Sat, Oct 19, 2019 3:52am 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 2007
Location: France
Are you human?: 951
Quote:
i guess i didn't read the onboard menu section well enough, i was thinking everything was accessible via the Torpedo Remote software. I expected the IR's i loaded on the card to show up in the IR Loader in Torpedo remote, but it seems to load IR's in Torpedo remote you are browsing them on your computer, but to load them on the device through the Menu you use the memory card browser you referenced above, is that right?


yes because we do not use the same protocole for the internal memory and the SD Card there are 2 different ways to access the memories. We will release an update to unify all that some day.

I agree that the instructions were a bit hidden, I already asked that they are put more clearly in the "3rd party IRs" section.

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two notes Help Desk


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Wed, Nov 20, 2019 3:16am 
Offline
Hack

Joined: Wed, Nov 20, 2019 3:13am
Posts: 2
Are you human?: 951
Hello! Tell me, what is the length allowed for downloadable IR files?

Sorry for my English, i'm using google translate.


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Wed, Nov 20, 2019 3:50am 
Offline
Plank Cranker Wanker
User avatar

Joined: Tue, Feb 22, 2011 3:43am
Posts: 2007
Location: France
Are you human?: 951
the format we read is mono 48KHz 24 bits and up to 200ms, but if your file is longer Torpedo Remote will just truncate it before sending it to the unit.

_________________
Affiliation: President @ OROSYS SAS, owner of Two Notes Audio Engineering

Creating pro audio product for the guitar and bass players:
Website : Two Notes Audio Engineering
Follow us on Youtube and Facebook
Two Notes samples on Soundcloud

For the best support, please check the FAQ and create a ticket on the Two notes Help Desk


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Thu, Nov 21, 2019 4:11pm 
Offline
Hack

Joined: Wed, Nov 20, 2019 3:13am
Posts: 2
Are you human?: 951
guillaume_pille wrote:
the format we read is mono 48KHz 24 bits and up to 200ms, but if your file is longer Torpedo Remote will just truncate it before sending it to the unit.

this length is correct for Torpedo Cab M?


Top
 Profile  
Reply with quote  
 Post subject: Re: Cab m and IR’s
PostPosted: Fri, Nov 22, 2019 3:06am 
Offline
Hack

Joined: Wed, Jul 11, 2018 2:56am
Posts: 8
Are you human?: 951
@ndronn For C.A.B. M you can use IRs from 20ms to 200 ms. If the IRs are longer than 200 ms they will be trucated by torpedo Remote.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group - Terms of Use