Help with 2013 MiM Charvel wiring

[WhiteShadow]

Had a couple wires come loose. Looks like one is from the neck pickup, and the other is a black wire that looks like its supposed to run from the toggle switch to possibly the potentiometer. Its a MiM san dimas with HH config. Only one volume pot, non coil splitting, and one 3 way toggle. Can someone help me out with a wiring diagram? Thanks!

 

[Avi8r2005]

Is it dimarzio or Seymour Duncan pickups? SD has worong diagrams on their website.

 

[WhiteShadow]

Is it dimarzio or Seymour Duncan pickups? SD has worong diagrams on their website.

Seymour duncan JB/59

 

[WhiteShadow]

They don't have anything for a basic HH, 1 vol (non coil splitting), 1 toggle setup

 

[shar-vell Dan]

SD 4 conductor humbucker wiring is red & white together, green & silver to ground. Black is hot.

 

[WhiteShadow]

Its these two wires

 

[shar-vell Dan]

Thats your ground wire from the claw.
You got like 5 black wires fuggin mexican electricians.
Plug the guitar into a practice amp and touch that wire between switch & pot til you hear it come alive.

 

[WhiteShadow]

Thats your ground wire from the claw.
You got like 5 black wires fuggin mexican electricians.
Plug the guitar into a practice amp and touch that wire between switch & pot til you hear it come alive.

What about the other one coming from the switch?

 

[Avi8r2005]

Here you go, just have to scroll thru the pull down menu to find you setup

 

[shar-vell Dan]

Here you go, just have to scroll thru the pull down menu to find you setup

According to this it goes back of pot.

 

[WhiteShadow]

Thanks guys, I think I got it! Much appreciated!