SpiderWars
Well-known member
This neck is beautiful and it sounds and plays killer but I just don’t gel with the profile. I also found that flashy flame isn’t my thing.
It’s asymmetrical and I usually like that but it’s a little too big and the bass side is more D-shaped than I like. With my calipers I measure 0.82” at the first and 0.95” at the 12th. Gotoh locking vintage style tuners.
More pics
Construction Type:
1 Piece Constructed
Orientation:
Right for Right Handed Players
Scale Length:
25.5" Standard Fender
Number of Frets:
22
Nut Width:
1.650" (41.9mm)
Nut Slot Style:
1/8" Nut Slot (Standard Fender)
Heel Width and Type:
2-3/16" (55.55mm) Rounded Strat
Truss Rod Type:
Dual Acting w/4mm Hex Adjust @ Head
Shaft Wood:
QS Flame Maple 4A Premium ($150.00)
Fingerboard Radius:
12"
Fingerboard Edge Style:
Semi Rolled Fingerboard Edges
Tuner Hole Size:
11/32" (Standard Kluson)
Top Inlay Type:
1/4" Dots (Black)
Side Markers:
Black 2mm
Side Dot Location:
Center of Fingerboard Wood
12th Dot Spacing:
Wide (Vintage Style Pre 1964)
Fret Size and Type:
7105 Stainless (Medium) ($40.00)
Back Profile Shape and Size:
AYS 81 94 (1965 Strat)
Binding:
NONE
Neck Roasting Option:
NONE
Tuner Install:
NONE by MusiKraft, Gotoh locking vintage style installed by me.
Nut Installation:
NONE by MusiKraft, bone nut cut and installed by me, intonates and rings out with no open buzzing.
Finish:
Raw from MusiKraft, TruOil by me. Wetsanded extensively with TruOil, very very smooth/slick.
Neck Mounting Holes:
Drill Neck Mounting Holes Standard Fender Pattern
It’s asymmetrical and I usually like that but it’s a little too big and the bass side is more D-shaped than I like. With my calipers I measure 0.82” at the first and 0.95” at the 12th. Gotoh locking vintage style tuners.
More pics
Construction Type:
1 Piece Constructed
Orientation:
Right for Right Handed Players
Scale Length:
25.5" Standard Fender
Number of Frets:
22
Nut Width:
1.650" (41.9mm)
Nut Slot Style:
1/8" Nut Slot (Standard Fender)
Heel Width and Type:
2-3/16" (55.55mm) Rounded Strat
Truss Rod Type:
Dual Acting w/4mm Hex Adjust @ Head
Shaft Wood:
QS Flame Maple 4A Premium ($150.00)
Fingerboard Radius:
12"
Fingerboard Edge Style:
Semi Rolled Fingerboard Edges
Tuner Hole Size:
11/32" (Standard Kluson)
Top Inlay Type:
1/4" Dots (Black)
Side Markers:
Black 2mm
Side Dot Location:
Center of Fingerboard Wood
12th Dot Spacing:
Wide (Vintage Style Pre 1964)
Fret Size and Type:
7105 Stainless (Medium) ($40.00)
Back Profile Shape and Size:
AYS 81 94 (1965 Strat)
Binding:
NONE
Neck Roasting Option:
NONE
Tuner Install:
NONE by MusiKraft, Gotoh locking vintage style installed by me.
Nut Installation:
NONE by MusiKraft, bone nut cut and installed by me, intonates and rings out with no open buzzing.
Finish:
Raw from MusiKraft, TruOil by me. Wetsanded extensively with TruOil, very very smooth/slick.
Neck Mounting Holes:
Drill Neck Mounting Holes Standard Fender Pattern
Last edited: