I am starting to record with a local engineer that uses the Suhr Reactive load and we are doing A/B tests vs the Studio to look for the desired tones.
To make the comparison more equal the Suhr and studio were run into the two notes WOS which had the same amp and settings making the Suhr and studio load boxes essentially.
The recorded Suhr reactive tracts are much louder (with no clipping or issues) then when we try to record the exact same guitar/amp set up with my Studio. We have to push the Studio input to high yellow and outputs to high yellow/red line to get the same volume as the Suhr into the DAW. He said it's like there is at least a 10db hold on the studio or "like it is only sending a commercial grade (not studio grade) signal out" to the DAW.
With my novice recording skills, I always thought that the Studio volume has been low when I've tracked at home - needing to really push amplifier and Studio input/output gain to match the Neural DSP plug-ins volumes I have been doing scratch tracks with.
What am I doing wrong or missing? Did I accidentally push a dampen or dB cut button somewhere or something similar?
Hope this makes sense as a question, thanks.
To make the comparison more equal the Suhr and studio were run into the two notes WOS which had the same amp and settings making the Suhr and studio load boxes essentially.
The recorded Suhr reactive tracts are much louder (with no clipping or issues) then when we try to record the exact same guitar/amp set up with my Studio. We have to push the Studio input to high yellow and outputs to high yellow/red line to get the same volume as the Suhr into the DAW. He said it's like there is at least a 10db hold on the studio or "like it is only sending a commercial grade (not studio grade) signal out" to the DAW.
With my novice recording skills, I always thought that the Studio volume has been low when I've tracked at home - needing to really push amplifier and Studio input/output gain to match the Neural DSP plug-ins volumes I have been doing scratch tracks with.
What am I doing wrong or missing? Did I accidentally push a dampen or dB cut button somewhere or something similar?
Hope this makes sense as a question, thanks.