Wet/dry signal chain suggestions & or diagrams

[trevjo7]

Dear all,
Please forgive me if this question has asked previously. I have a relatively small board that I would like to integrate into a simple wet/dry rig and am looking for signal chain guidance. The pedals i have are: comp, Distortion, Delay, Slo reverb, Ditto x2 looper and a volume pedal at the end. The two amps i hope to include are a Music Man RD210 and Roland Jazz Chorus 77.

 

[Nigel]

Sounds like a good chain, question is if you want only wet in the wet cab or wet and dry.

I've had only delay and only chorus, etc in the wet cab side but have been liking it mixed like EVH as of late. We'll see how that pans out once we get into the band room.

 

[trevjo7]

Sounds like a good chain, question is if you want only wet in the wet cab or wet and dry.

I've had only delay and only chorus, etc in the wet cab side but have been liking it mixed like EVH as of late. We'll see how that pans out once we get into the band room.

Thanks for taking the time to reply, much appreciated. Lot's to think about with this as I'm new to it. Probably have have one combo just clean and the other for the effects.

 

[Nigel]

Thanks for taking the time to reply, much appreciated. Lot's to think about with this as I'm new to it. Probably have have one combo just clean and the other for the effects.

Okay, you'll need to get some 1/4" jacks to plug into the dry out of the stereo pedals. That's what I did with my Boss DD-3 delay and CH-1 Stereo Chorus. Works great!

 

[trevjo7]

Thanks again for your help.