Problems setting up W/D/W with Boss SDE 3000 EVH Pedal

[rosencj]

I recently purchased the Boss SDE 3000 EVH Delay Pedal along with other gear to make the W/D/W thing happen.
For the life of me, I cannot get it to work. For those of you that have a better grasp of the signal chain than I do, please chime in on any fix recommendations.
Here is my signal chain:

Guitar > Boss SDE Pedal Mono Input
Boss SDE Pedal Send > Front of EVH EL34 Head > Speaker Cable into 2x12 EVH Cab
EVH EL34 Head FX Send > Boss SDE Pedal Return
Boss SDE Pedal Direct L/Mono Output > EVH EL34 Head FX Return
Boss SDE Pedal EFX Left Out > Fryette 2/50/2 Stereo Amp Channel A Input
Boxx SDE Pedal EFX Right Out > Fryette 2/50/2 Stereo Amp Channel B Input
Fryette L/R Outs to Left/Right 2x12" Cabs

I have the Boss SDE Settings set to Mono In and DireEFII Out (Dry Center Cab, 100% Wet L/R Cabs)

I only get sound out of the EVH Head and 2x12 cab with the dry signal. Nothing coming out of the Fryette.

 

[romanianreaper]

 

[romanianreaper]

That seems right to me but make sure you are not missing a setting. Double check your cords too. It is Murphy's Law when stuff like this happens, could be that a plug inside plugged in completely, a cord is broke, etc.

I use mine in just stereo now but i can sew that you'll definitely want w/d/w with those Fryettes. Good luck!

 

[Panhead5]

You take the guitar input on your head and plug it into the send on the delay unit ?

 

[rosencj]

You take the guitar input on your head and plug it into the send on the delay unit ?

Yes. Send of the pedal into the front of the amp.

 

[romanianreaper]

I will say this, the manual is confusing for some reason. They don't explain enough.

 

[rosencj]

I think the 4 cable method diagram they have in the manual is misleading. There are a lot of comments in other threads that a line out signal needs to be tapped at the direct out from the master amp to the cab and that signal needs to go to the SDE pedal.